+44 01302 714 513
1x19 Super Duplex Stainless Steel Wire Rope
1x19 Super Duplex Wire Rope
Highest quality super duplex stainless steel cable from 6mm diameter to 10mm diameter
1x19 Super Duplex Stainless Steel Wire Rope
| Available Options | Diameter (mm) |
MBL (kN) |
MBL (Kg) |
Weight (Kg/100m) |
Code | Price (ex VAT) (Length: 1 metre) | |
|---|---|---|---|---|---|---|---|
| 6mm 1x19 Super Duplex Wire | 6 | 33.9 | 3640 | 17.2 | WSSD-19-060 | POA | |
| 8mm 1x19 Super Duplex Wire | 8 | 56.4 | 5750 | 31.1 | WSSD-19-080 | POA | |
| 10mm 1x19 Super Duplex Wire | 10 | 87.8 | 8950 | 48.6 | WSSD-19-100 | POA |
Characteristics
| Characteristic | Benefit |
|---|---|
| High inherent corrosion resistance | No need to protect by surface coating |
| Outstanding pitting/crevice resistance | Ideal for oil & gas, marine & defence applications |
| Excellent corrosion resistance in acids | Ideal for chemical industry |
| High resistance to stress corrosion cracking | Suitable for highly loaded components in chloride environments |
| High resistance to chloramines at high temperature / humidity | Suitable for use in safety critical supports in swimming pools |
| High mechanical strength | Scope for smaller diameter and hardware |
| Good fatigue strength | Applicable for cyclically loaded assemblies |
| High modulus of elasticity | Low propensity to stretch |
Loading
Wire Rope Load Definitions and Explanations
MBL - Minimum Break Load = The stress which, when steadily applied to a structural member, is just sufficient to break or rupture it. Also known as ultimate load.
SWL - Safe Working Load = Briefly defined, the 'safe working load' of a line is the load that can be applied without causing any kind of damage to the wire rope. Note that the safe working load is considerably less than the breaking strength.
The SWL is calculated using a given safety factor, SF, which for S3i Ltd, is provided as 6:1
Factors of safety should always be applied when calculating maximum wire rope loading conditions. In cases of doubt, an engineer should be consulted to assess the loading and advise on suitable factors of safety to ensure that overloading cannot occur.
The SWL is calculated using a given safety factor, SF, which for S3i Ltd, is provided as 6:1
Super Duplex Data Sheet download here
High performance products that have been specifically developed for demanding corrosive environments.
Ordering
Super Duplex products are currently only available to order.
Please contact us with your enquiry.
| Search by product code |
