Arm Rail Bracket - Traditional - Matt Brass Finish

Arm Rail Support with Matt Brass PVD Coated Finish for Tubular Bar Railing Handrail

Matt brass effect arm rail bracket support with a clean and simple design for 38.1mm tube. This traditional style of bracket can be attached to the underside of counters and bars to provide a strong handrail support.

Arm Rail Bracket Support - Bar Railing

Options Finish
Material Code Price (inc VAT) Quantity 
38.1mm Tube Matt Brass 38.1 130 23 Zamak 11.0105.038.21 £23.98
Special order

Special order item, please allow a minimum of 10 working days for production.

Dimensions: For full product dimensions please view this page on a tablet, laptop or desktop computer.

Physical Vapour Deposition

Zamak Construction - PVD Coating

Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.

PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.

Key Features :

Matt Brass Finish Matt brass effect finish.
38.1mm Diameter Tube Fits 38.1mm diameter tube.
Screw Fixings Supplied Countersunk screws are supplied for installation.
Tools Required For installation you will require a few simple household tools.

Arm support to accept 38.1mm (1.5 inch) diameter tube,

Manufactured from Zamak with a PVD coating to give a hard-wearing matt brass finish (Not solid brass).

Suitable for indoor use only.

Two countersunk fixing points for secure attachment.

Screw fixings supplied for direct installation on to hardwood surfaces.

Tubular rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.

We would always recommend spacing arm rail brackets no more than 700 mm apart.

Arm Rail Bracket Support Installation Advice

Installation Advice

Arm Rail Bracket Installation Advice

1. Start by marking the fixing positions of your arm rail brackets and secure in place using the screws provided (you may wish to use your own screws dependent upon mounting surface).

Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.

2. Once tube is in place, simply re-tighten the grub screw to secure the tube firmly in position. For the perfect finishing touch, just add a stylish End Cap to open tube ends.

You may be interested in...

Tube - Matt Brass Finish

Tube with Matt Brass Finish for bar rail fittings.

Tube Connectors and Elbows

Tube Connectors and Elbows for bar railing.

Tube End Caps

Tube End Caps for the perfect finishing touch.

Select your product
Show prices