Bar Foot Rail Bracket - Angle Stem - Matt Brass Finish
Foot Rail Bracket Support with Angle Stem and Matt Brass PVD Coated Finish
Matt brass effect finish side mount bar rail bracket with angle stem designed to accept 38.1mm and 50.8mm bar rail tube.
Bar Foot Rail Bracket - Angle Stem - Bar Mount
|Material||Code||Price (inc VAT)||Quantity|
|Bracket, 38.1mm||Matt Brass||38.1||140||100||Zamak||11.0102.038.21||£30.19|
|Bracket, 50.8mm||Matt Brass||50.8||145||105||Zamak||11.0102.050.21||£51.52|
Special order item, please allow a minimum of 10 working days for production.
Zamak Construction - PVD Coating
Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.
Key Features :
|Matt brass effect finish.|
|Option for 38.1mm diameter tube.|
|Option for 50.8mm diameter tube.|
|Countersunk screws are supplied for installation.|
|For installation you will require a few simple household tools.|
High quality antique brass finish foot rail bracket for direct mounting on to bar and counter fronts to support tubular foot rail.
Available for both 38.1mm and 50.8mm diameter tube.
Suitable for indoor use.
Three countersunk fixing points for secure attachment.
Supplied with screws for direct installation on to hardwood surfaces.
Tubular foot rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.
Manufactured from Zamak with a PVD coating to give a hard-wearing matt brass finish (Not solid brass).
These foot railing supports should never be wall mounted for use as handrail support.
We would always recommend spacing foot rail brackets no more than 700 mm apart.
1. Start by marking the fixing position of the foot rail bracket, use a few household tools to secure you bar mount bracket in place with the screws provided (you may wish to use your own screws dependent upon mounting surface).
Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.
2. Simply re-tighten the grub screw to secure tube firmly in position. To finish open tube ends neatly you can add a stylish Tube End Cap.