Bar Railing Bracket - Ball Centre Pillar - Matt Brass Finish
Centre Post Support with Ball Design in PVD Coated Brass Finish for Tubular Bar Railing
Matt brass effect bar handrail bracket with central through hole ball design for 38.1mm Ø tube.
Bar Railing Bracket - Ball Centre Pillar
|Material||Code||Price (inc VAT)||Quantity|
|38.1mm Ø Tube||Matt Brass||38.1||40||70||70||Zamak||11.0600.038.21||£20.71|
Special order item, please allow a minimum of 10 working days for production.
Dimensions: For full product dimensions please view this page on a tablet, laptop or desktop computer.
Zamak Construction - PVD Coating
Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.
Key Features :
|Matt brass effect finish.|
|Fits 38.1mm diameter tube.|
|Countersunk screws are supplied for installation.|
|For installation you will require a few simple household tools.|
Through hole post to accept 38.1mm (1.5 inch) diameter tube, suitable for attaching to the upper side of counters and bars to provide a strong and secure grab/handrail support.
Manufactured from Zamak with a PVD coating to give a hard-wearing matt brass finish (Not solid brass).
Suitable for indoor use only.
Two countersunk fixing points for secure attachment.
Screw fixings supplied for direct installation on to hardwood surfaces.
Quick and easy installation with the use of a few household tools.
Tubular rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.
Designed for use on horizontal surfaces only. Do Not use as a handrail wall bracket.
We would always recommend spacing bar railing brackets no more than 700 mm apart.
Bar railing brackets should only be matched with similar design style, ie: Ball Pillar to Ball Pillar, this is due to differing heights between styles.
1. Start by marking the fixing position of the ball centre pillar and secure in place using the screws provided (you may wish to use your own screws dependent upon mounting surface).
Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.
2. Simply re-tighten the grub screw to secure tube firmly in position. To finish open tube ends neatly you can opt for a stylish End Cap or use a Ball End Pillar.