Brass Design Handrail Kit - Angled Stem Bracket
Complete Polished Brass Effect 38.1mm Ø Handrail with 90 Degree Angled Stem Brackets
Elegant brass design handrail and classic angled stem brackets with traditional 3 hole screw mount, providing a strong and stable support for your handrail
Brass Design Handrail - Angled Stem Bracket
| Options | Finish | L (mm) |
Ø (mm) |
No. of Brackets | L1 (mm) |
L2 (mm) |
Code | Price (inc VAT) | Quantity |
|---|---|---|---|---|---|---|---|---|---|
| 1000mm | Brass Design | 1000 | 38.1 | 2 | 150 | 700 | 22.119.38.100.H | £60.95 | |
| 1500mm | Brass Design | 1500 | 38.1 | 2 | 150 | 1200 | 22.119.38.150.H | £77.68 | |
| 2000mm | Brass Design | 2000 | 38.1 | 2 | 150 | 1700 | 22.119.38.200.H | £94.39 | |
| 2500mm | Brass Design | 2500 | 38.1 | 3 | 150 | 1100 | 22.119.38.250.H | £119.95 |
Tip: To view the product code and full product table on mobile please tilt your device to landscape.
Please Note: Delivery charge of £24.00 inc VAT applies to lengths over 1.5 metres.
This handrail kit is available to order on-line in a choice of 1 metre, 1.5 metre, 2 metre and 2.5 metre lengths.
If you require a custom length please don't hesitate in calling us.
Note: Not solid brass.
 |
Brass effect finish (Not solid brass). |
 |
38.1mm diameter handrail. |
 |
Pre-drilled for handrail brackets. |
 |
Screw fixings are supplied for installation. |
 |
For installation you will require a few simple household tools. |
38.1mm tubular brass design handrail with fitted end caps, complete with angled stem brackets and fixings (brackets supplied loose for installation).
Handrail tube manufactured from 304 grade stainless steel with polished brass effect PVD coating.
Brackets and end caps manufactured from Zamak with polished brass effect PVD coating.
PVD coatings offer a superb, durable, low maintenance finish.
Mounting screws included (Please note: wall plugs not included).
Two brackets supplied with 1 metre, 1.5 metre and 2 metre handrails.
Three brackets supplied with 2.5 metre handrail.
 |
Handmade To OrderPlease allow 3 to 5 working days from order for manufacture and delivery. |
Please Note: |
|
|---|---|
 |
Lengths over 1.5 metres will attract a delivery surcharge of £24.00 inc VAT. This applies to the United Kingdom only. |
 |
Lengths over 1.1 metres are not eligible for international delivery. Please contact us by phone or email and we will try and find you the best solution. |
Installation Advice
Need some help?Download and print our installation advice sheet for this tubular brass design handrail with angled stem brackets.  |
 |
For a quick and easy installation you will need a few household tools: pencil, tape measure, spirit level, drill, screwdriver and suitable rawl/wall plugs.
You can mount your handrail to the height that suits you best.
Our recommended mounting heights are based upon the industry standard.
If mounting your handrail on a flat level we recommend a height of 1100mm from the floor to the top of the handrail.
For inclines we recommend a height of 900mm from stair to top of handrail.
Bracket Installation Advice
First we recommend that you mark out the bracket positions in pencil using a tape measure and spirit level onto the intended fixing surface.
Tip if you lightly attach brackets to handrail first and then place handrail into position this will help you mark the bracket placements perfectly, once positions are marked you can remove brackets from handrail for installation.
1. Drill pilot holes and insert your rawl/wall plugs and fix handrail brackets securely in place.
2. Position handrail in place and secure using the screws provided.
