Cable Display Kit - Floor to Ceiling Mount
Easy Fit Cable Display and Wire Hanging Kit - Floor to Ceiling
Cable Display Kit - Floor to Ceiling Mount
Options | Cable Length (mm) |
Cable Ø (mm) |
Floor Tensioner | Ceiling Tensioner | Code | Price (inc VAT) | Quantity |
---|---|---|---|---|---|---|---|
Cable Display Kit | 4000 | 2.5 | 1 | 1 | Display-001 | £22.20 |
Key Features:
![]() |
2.5mm Ø, 7x7 stainless steel wire rope. |
![]() |
Self-tensioning ceiling mount end fitting. |
![]() |
Chrome finish. |
![]() |
1.5mm Allen key required for installation. |
Floor to Ceiling Mount ´Easy Fit´ Cable Display Kit.
Create your own stylish display with this floor to ceiling suspended cable display kit. Complete with top & bottom tensioner fittings and stainless steel wire rope for you to trim to size.
Each Kit Includes:
- 1 x Floor Mount Tensioner.
- 1 x Ceiling Mount Self-tensioning Tensioner.
- 4 Metres of 2.5mm Diameter 7x7 Stainless Steel Wire Rope.

Tensioners are suitable for direct installation onto wood, we would always recommend using a plastic/rawl plug for mounting on to other materials.
Designed to accept horizontal and vertical supports from the ´Easy Fit´ cable display and wire hanging system.
Important
Always check that ceilings are strong enough to take the weight of the items being displayed. No responsibility will be taken for incorrect loading. This responsibility rests with the installer.
![]() |
Need Some Support?This display kit only accepts shelf and signage supports from the ´Easy Fit´ Cable Display range. |
Installation Advice
Need some help?Download and print our installation advice sheet for the Floor to Ceiling Cable Display Kit. |
![]() |
We recommend marking the position of the top tensioner first and using a plumb line to mark the position for the bottom tensioner.
You can place shelf supports and connectors onto the wire rope before connecting both ends - supports can be adjusted to the correct position once the wire has been tensioned.
Ceiling Cable Tensioner
1. Unscrew the main body from the threaded mounting block.
2. Secure the threaded mounting block in place with the screw provided.
3. Replace main body onto the threaded mounting block.
4. Unscrew the end fitting.
5. Press the end fitting towards the body and insert wire rope firmly until it locks in place.
6. To fully secure the wire tighten the end screw back towards the main body.

Floor Cable Tensioner
1. Unscrew the main body from the threaded mounting block to reveal end stopper.
2. Secure the threaded mounting block in place with the screw provided.
3. Pass wire rope through body and end stopper, fix in place by tightening the grub screws using a 1.5mm allen key.
4. Replace main body onto the threaded mounting block.

You may be interested in...

Single Shelf Support - Adjustable cable display clamp.

Double Shelf Support - Adjustable cable display clamp.

Single Shelf Support - Fixed position cable display clamp.

Double Shelf Support - Fixed position cable display clamp.