Cable Tensioner - Ceiling / Floor Mount

Cable Display Tensioner - Ceiling and Floor Mount

Ceiling and Floor Mount Tensioner End Fitting - Easy Fit Cable Display System

Available Options	Wire Ø (mm)	Pack Size	Code	Price (inc VAT)
Cable Tensioner	2.5	1	25.0503.002.17	£10.44

	Accepts 2.5mm Ø, 7x7 stainless steel wire rope.
	Self-tensioning.
	Chrome Finish.

Cable Display Tensioner - Ceiling / Floor Mounting End Fitting.

Self-tensioning design to hold 2.5mm diameter stainless steel wire rope as part of a suspended cable display.

Suitable for direct installation onto wood, we always recommend using a plastic/rawl plug for mounting on to other materials.

For ease of use this tensioner can be mounted in the top or bottom position of a cable display, perfect for positioning where access is limited.

MUST be used in conjunction with 2.5mm Ø, 7x7 construction stainless steel wire rope only.

High quality chrome finish.

Always check that mounting surfaces are strong enough to take the weight of the items being displayed.

No responsibility will be taken for incorrect loading.
This responsibility rests with the installer.

1. Unscrew the main body from the threaded mounting block.

2. Secure the threaded mounting block in place with the screw provided.

3. Replace main body onto the threaded mounting block.

4. Unscrew the end fitting.

5. Press the end fitting towards the body and insert wire rope firmly until it locks in place.

6. To fully secure the wire tighten the end screw back towards the main body.