Cable Tensioner - Floor Mount

Cable Display Tensioner - Floor Mount

Floor Mounted Tensioner End Fitting - Easy Fit Cable Display System

Options	Wire Ø (mm)	Pack Size	Code	Price (inc VAT)
Cable Tensioner	2.5	1	25.0502.002.17	£10.80

	Accepts 2.5mm Ø, 7x7 stainless steel wire rope.
	Chrome Finish.
	1.5mm Allen key required for installation.

Cable Display Tensioner - Floor Mounting End Fitting.

Designed to hold 2.5mm diameter stainless steel wire rope firmly in place as part of a suspended cable display.

Suitable for direct installation into wood, we would always recommend using a plastic/rawl plug for mounting on to other materials.

Wire rope is held in place using a simple grub screw design.

MUST be used in conjunction with 2.5mm Ø, 7x7 construction stainless steel wire rope only.

High quality chrome finish.

Always check that mounting surfaces are strong enough to take the weight of the items being displayed.

No responsibility will be taken for incorrect loading.
This responsibility rests with the installer.

1. Unscrew the main body from the threaded mounting block to reveal end stopper.

2. Secure the threaded mounting block in place with the screw provided.

3. Pass wire rope through body and end stopper, fix in place by tightening the grub screws using a 1.5mm allen key.

4. Replace main body onto the threaded mounting block.