Decorative Garden Screens - Posts, Clamps and End Caps
Posts, Clamps and End Caps for Decorative Screening Fence Panels

|
|
|
||||||
|
|
|
||||
|
|
||||
Full range of posts and fittings for decorative garden screens and balustrade panels. Designed in Britain and made from recycled materials.
Panels are affixed by clamps to aluminium posts, which themselves are set in concrete, just like traditional fence posts.
Optional terrace feet available for mounting directly onto hard surfaces such as a patio or terrace. For decking please consult your decking installer and ensure you fix to frame substrate below.
All fittings have a high quality powder-coated RAL 7021 (Black/Grey) finish.
Aluminium's resistance to corrosion, and the inherent strength of their box-section construction means that posts will stand the test of time.
Full Height Decorative Garden Screens:

First (or stand alone) panel will require: 2 x Posts, 6 x Clamps, 2 x End Caps (+ 2 x Terrace Feet if surface mounting).
Each subsequent panel will require: 1 x Post, 6 x Clamps, 1 x End Cap (+ 1 x Terrace Foot if surface mounting).

Half Height Decorative Balustrade Screens:

In Ground Mount
If setting your posts into the ground using concrete you should cut your full height posts down to form two 1.6m (1600mm) posts
First (or stand alone) panel will require: 2 x Posts (cut to form 2 x 1.6m posts), 4 x Clamps, 2 x End Caps.
Each subsequent panel will require: 1 x Post (cut to 1.6m), 4 x Clamps, 1 x End Cap.
Surface Mount
If mounting your posts onto a deck or terrace each post will need to be cut to form two 1.1m (1100mm) posts.
First (or stand alone) panel will require: 1 x Post (cut to form 2 x 1.1m posts, 4 x Clamps, 2 x End Caps, 2 x Terrace Feet.
Each subsequent panel will require: 0.5 x post (cut to 1.1m), 4 x Clamps, 1 x End Cap, 1 x Terrace Foot.
