Double Rail End Post - Matt Brass - 6mm Bar Rail
End Post with PVD Coated Brass Effect Finish, Push Fit for 6mm Double Gallery Rail
Matt brass mini rail end post designed to accept two 6mm tubular rods, for direct installation into wood furniture and shelving (drilling required).
6mm Bar Railing - Post - Flush Mount - Matt Brass
|Pack Size||Material||Code||Price (inc VAT)||Quantity|
|End Post||Matt Brass||6||10||64||1||Zamak||11.0665.006.21||£15.58|
Tip: To view the full product table on mobile please tilt your device to landscape.
Special order item, This item is finished by hand, please allow 10 working days for production.
|Matt brass effect finish.|
|Designed to accept 6mm Diameter Rod and Bar.|
|For installation you will require a few simple household tools.|
End post manufactured from Zamak with a PVD coating to give a hard-wearing antique matt brass finish (Not solid brass).
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating, offering good impact strength, excellent abrasion resistance and durability.
Simple push fit fixing. Note: Requires 14mm hole depth for installation.
Installed post height of 64mm.
The ideal finishing touch for restaurants, public houses and other commercial settings.
Optional post adapters for corners and angles available.
Always start by marking your post positions, ensuring you have the correct number of posts and 6mm Ø rails.
Drill a 14mm deep reception hole using a 4mm Ø drill bit.
Simply insert your post directly into the hole ensuring it sits flush, if needed you can tap posts gently in to position using a soft rubber hammer, do not use a metal hammer as this will damage your post.