End Post - Matt Brass - 10mm Bar Rail
End Post with PVD Coated Matt Brass Effect, Push Fit Fixing for Single 10mm Mini Rail
Matt brass mini rail end post for 10mm diameter rod and bar, designed for direct installation into wood furniture and shelving (drilling required).
10mm Bar Railing - Post - Flush Mount - Matt Brass
|Pack Size||Material||Code||Price (inc VAT)||Quantity|
|End Post||Matt Brass||10||15||71||1||Zamak||11.0660.010.21||£16.25|
Special order item, This item is finished by hand, please allow 10 working days for production.
|Matt brass effect finish.|
|Designed to accept 10mm Diameter Rod and Bar.|
|For installation you will require a few simple household tools.|
End post manufactured from Zamak with a PVD coating to give a hard-wearing antique matt brass finish (Not solid brass).
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating, offering good impact strength, excellent abrasion resistance and durability.
Simple push fit fixing. Note: Requires 14mm hole depth for installation.
Installed post height of 71mm.
Ideal for display shelving in restaurants, public houses and commercial settings.
Optional post adapters for corners and angles available.
Always start by marking your post positions, ensuring you have the correct number of posts and lengths of 10mm Ø rail.
Drill a 14mm deep reception hole using a 8mm Ø drill bit.
Simply insert your post directly into the hole ensuring it sits flush, if needed you can tap posts gently in to position using a soft rubber hammer, do not use a metal hammer as this will damage your post.