Fascia Mounting Base Profile - Frameless Pro Glass Balustrade
Aluminium Fascia Mount Base Profile for Glass Balustrade
Fascia Mount Base Profile - Frameless Pro Glass Balustrade
|Drainage Holes||Fixing Hole Ø
|Material||Code||Price (inc VAT)||Quantity|
|Manufactured from aluminium.|
|Anodised stainless steel effect finish.|
|Adjustable Safety Wedge Kits available.|
|High performance Anchor Bolts recommended.|
|120mm x 10mm Wood Screws for timber* mounting available.|
Fascia Mount Base Profile with U-Shaped Channel to accept Balustrade Glass
Aluminium with a stainless steel effect finish, for indoor and outdoor use.
Available in lengths of 2500mm or 5000mm.
Designed for mono and laminated glass thickness of 12mm - 21.52mm.
Pre-drilled with 14mm mounting holes at a spacing of 200mm, allowing for fewer anchors.
Connector pins supplied for perfect alignment with other profiles.
Integrated water drainage channels.
Suitable for mounting onto concrete, masonry and timber*.
Combine with the Adjustable Safety Wedge Kit to allow for glass adjustment in every direction by up to 10 mm - from inside the balustrade.
Important:If installing onto timber* please take advice from an engineer or structural specialist.
The Essential Partner
High Performance Anchor Bolt, Hexagon head,
|Lengths over 2.5 metres will attract a delivery surcharge of £40.00 inc VAT.
This applies to the United Kingdom only.
|Lengths over 1.8 metres are not eligible for international delivery.
Please contact us by phone or email and we will try and find you the best solution.
Typical Fascia Mount Frameless Pro Glass Balustrade Components
Installation Advice - Frameless Pro Glass Balustrade
Video: Fascia Mount Frameless Pro Glass Balustrade Installation - S3i Group
Fascia Mount Frameless Pro Glass Balustrade Installation Advice. An easy to understand guide to fitting a fascia mounting glass balustrade with the Frameless Pro glass channel system.
Need some help?
Download and print our installation advice sheet for Fascia Mount Frameless Pro Glass Balustrade.
Fascia Mount Connection Advice - Frameless Pro Glass Balustrade
Base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.
CAD Drawing Download
CAD File (dwg)
(Compatible software required)
You may be interested in...
Inner Corner Base - Fascia Mount Frameless Pro Glass Balustrade.
Outer Corner Base - Fascia Mount Frameless Pro Glass Balustrade.
Rubber Insert and Safety Wedge Kit adjustable design for glass alignment.
Anchor Bolts in marine grade stainless steel and zinc plated finishes.