- Balustrade Systems
- Glass Balustrade
- Frameless Glass Balustrade
- Ready Made Handrails
- Balustrade Wire Kits
- Wire Trellis Kits
- Cable Display Systems
- Interior Fittings
- Door Furniture & Fittings
- Wire Rope Fittings & Hardware
- Lifting Gear & Rigging Equipment
- Wire Rope Assemblies
- Wire Rope Tools & Cutters
- Stainless Steel Shackles
- Tie Bar Systems
Fascia Mounting Y Shaped Frameless Pro Glass Balustrade
Aluminium 'Y' Shaped Base Profiles for Glass Channel Balustrade
EASY GLASS ALIGNMENT with Fascia Mount ´Y´ Shaped Frameless Pro Glass Balustrade
´Y´ shaped profiles offer great flexibility and can be mounted flush or up to 70mm above the mounting surface, perfect for areas where you are installing a raised floor, such as decking. The ideal choice for balconies, landings, walkways and stairways.
Suitable for both indoor and outdoor use with profiles manufactured from aluminium with an anodised stainless steel effect finish, to provide a strong, stable and secure barrier.
The Adjustable Safety Wedge Kit allows you to fine-tune the positioning of each glass panel from the inner side of the balustrade - There is no need for a scaffold to adjust the glass from the outer side.
Will support mono and laminated glass thickness of 12mm - 21.52mm.
Pre-fabricated corner components and accessories to create the layout of your choice.
For the perfect finishing touch you can add a cladding profile to cover the mounting holes.
Cost effective and quick to install, with just five anchor points per metre. High performance anchor bolts for mounting onto masonry and concrete available.
You can leave your glass plain for maximum transparency or finish with one of our easy to fit channel handrails or cap rails. Available in a variety of materials, shapes and sizes.
Advantages of Fascia Mounting ´Y´ Shaped Frameless Pro Glass Balustrade:
- Can be raised to a max of 70mm above mounting structure.
- Fewer anchors required, and no need for countersunk anchors.
- Glass panels adjustable in every direction by up to 10mm.
- Connector pins allow for quick and easy alignment of multiple base units.
- Integrated water drainage.
- Suitable for mounting onto concrete or masonry.
- Wide range of channel handrails or cap rails available.
|Fascia Mount ´Y´ Shaped Frameless Pro Glass Balustrade|
|Usage||Light to medium commercial and residential|
|Glass Thickness (mm)||12 to 21.52|
|Estimated Install Time||1.5 - 2 hours per metre|
Mounting AdviceAny quoted figures about the performance of these products relate to installing into concrete.
Please take advice from an engineer or specialist when installing into any other material, such as timber.
We can now powder coat Frameless Pro profiles to any given RAL colour of your choice.
This a bespoke service, with components being powder coated to order.
For further information simply contact our sales and technical team on 01302 752 504 or email us at firstname.lastname@example.org
Typical Components for a Fascia Mounting ´Y´ Shaped Frameless Pro Glass Balustrade
Installation Advice - Fascia Mounting ´Y´ Shaped Frameless Pro Glass Balustrade
Video: Fascia Mount 'Y' Shaped Frameless Pro Glass Balustrade Installation - S3i Group
Fascia Mount 'Y' Shaped Frameless Pro Glass Balustrade Installation Advice. An easy to understand guide to fitting 'Y' Shaped fascia mounting glass balustrade with the Frameless Pro glass channel system.
Need some help?
Download and print our installation advice sheet for Fascia Mount ´Y´ Shaped Frameless Pro Glass Balustrade.
Connection Advice - Fascia Mount ´Y´ Shaped Frameless Pro Glass Balustrade
´Y´ shaped base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.