- Balustrade Systems
- Glass Balustrade
- Frameless Glass Balustrade
- Ready Made Handrails
- Balustrade Wire Kits
- Wire Trellis Kits
- Cable Display Systems
- Interior Fittings
- Door Furniture & Fittings
- Wire Rope Fittings & Hardware
- Wire Rope Assemblies
- Wire Rope Tools & Cutters
- Stainless Steel Shackles
- Tie Bar Systems
Fascia Mounting Y Shaped Base Profile - Frameless Pro Glass Balustrade
Aluminium ´Y´ Shaped Base Profile for Glass Channel Balustrade
Fascia Mount Y Shaped Base Profile - Frameless Pro Glass Balustrade
|Drainage Holes||Fixing Hole Ø
|Material||Code||Price (inc VAT)|
|Manufactured from aluminium.|
|Anodised stainless steel effect finish.|
|Adjustable Safety Wedge Kits available.|
|High performance Anchor Bolts recommended.|
'Y' Shaped Base Profile with U-shaped Channel to accept Balustrade Glass
Can be mounted flush with the mounting surface or up to 70mm above.
Aluminium with an anodised stainless steel effect finish, suitable for both indoor & outdoor use.
Available in lengths of 2500mm or 5000mm.
Pre-drilled with 14mm mounting holes at a spacing of 200mm, allowing for fewer anchors.
Will accept mono and laminated glass thickness of 12mm - 21.52mm.
Connector pins supplied for quick and easy alignment with other profiles.
Integrated water drainage channels.
Suitable for mounting onto concrete and masonry.
Combine with the adjustable safety wedge kit for 10mm adjustment of glass in every direction from the inner side of the balustrade.
The Essential Partner
High Performance Anchor Bolt, Hexagon head,
|Lengths over 2.5 metres will attract a delivery surcharge of £40.00 inc VAT.
This applies to the United Kingdom only.
|Lengths over 1.8 metres are not eligible for international delivery.
Please contact us by phone or email and we will try and find you the best solution.
Typical Top Mounting 'Y' Shaped Frameless Pro Glass Balustrade Components
Installation Advice - Frameless Pro Glass Balustrade
Video: Fascia Mount 'Y' Shaped Frameless Pro Glass Balustrade Installation - S3i Group
Fascia Mount 'Y' Shaped Frameless Pro Glass Balustrade Installation Advice. An easy to understand guide to fitting 'Y' Shaped fascia mounting glass balustrade with the Frameless Pro glass channel system.
Need some help?
Download and print our installation advice sheet for Fascia Mount ´Y´ Shaped Frameless Pro Glass Balustrade.
Fascia Mount Connection Advice - Frameless Pro Glass Balustrade
´Y´ shaped base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.
You may be interested in...
Inner Corner ´Y´ Base - Fascia Mount Frameless Pro Glass Balustrade.
Outer Corner ´Y´ Base - Fascia Mount Frameless Pro Glass Balustrade.
Rubber Insert and Safety Wedge Kit adjustable design for glass alignment.
Anchor Bolts in marine grade stainless steel and zinc plated finishes.