Outer Corner Base - Top Mount Glass Balustrade
Top Mount 90° Outer Corner Base Profile for Frameless Pro Glass Balustrade
Outer Corner Base Profile - Top Mount - Frameless Pro Glass Balustrade
|Options||Drainage Holes||Fixing Hole Ø
|Material||Code||Price (inc VAT)||Quantity|
|Manufactured from aluminium.|
|Stainless steel effect satin finish.|
|Corner angle of 90°.|
|Adjustable Safety Wedge Kits available separately.|
|Anchor Bolts for masonry mounting available separately.|
|120mm x 10mm Wood Screws for timber* mounting available separately.|
90° Outer Corner Glass Mounting Profile with U-Shaped Channel.
Manufactured from aluminium with a stainless steel effect finish, suitable for both indoor and outdoor use.
Designed for mono and laminated glass thickness of 12mm - 21.52mm.
Two fixing points with pre-drilled 14mm mounting holes.
Alignment to compatible base profiles is quick and easy with the ingenious Connector Pin system (Extra pins available separately).
Integrated water drainage channels.
Suitable for mounting onto concrete, masonry and timber*.
Glass is secured in place with the Adjustable Safety Wedge Kit, allowing for glass adjustment in every direction by up to 10mm - from inside the balustrade.
Important:If installing onto timber* please take advice from an engineer or structural specialist.
The Essential Partner
High Performance Anchor Bolt, Hexagon head,
Typical Top Mounting Frameless Pro Glass Balustrade Components
Installation Advice - Frameless Pro Glass Balustrade
Video: Top Mount Frameless Pro Glass Balustrade Installation - S3i Group
Top Mount Frameless Pro Glass Balustrade Installation Advice. An easy to understand guide to fitting a top mounting glass balustrade with the Frameless Pro glass channel system.
Need some help?
Download and print our installation advice sheet for Top Mount Frameless Pro Glass Balustrade.
Outer Corner Connection Advice - Top Mount Frameless Pro Glass Balustrade
Base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.