Rawl R-CAS-V Resin Glass Capsules
High Performance, Quick Setting Styrene-Free Vinylester Resin Capsules for Threaded Rod
Rawl R-CAS-V Resin Glass Capsules
| Options | Capsule Size (mm) |
Min. Installation Depth (mm) |
Pack Size | Code | Price (inc VAT) | Quantity |
|---|---|---|---|---|---|---|
| M8 Resin Capsule | 8 | 80 | 1 | R-CAS-V-M8-01 | £1.74 | |
| M10 Resin Capsule | 10 | 90 | 1 | R-CAS-V-M10-01 | £1.84 |
Tip: To view the full product table on mobile please tilt your device to landscape.
Features and Benefits
Premium anchor resin capsule ideal for use in safety critical applications, for example, heavy duty fastenings with small spacing and edge distances.
Supplied individually.
Choice of M8 and M10 capsules.
Suitable for applications where close edge and spacing distances are required.
Each capsule contains precise amounts of ingredients, ensuring consistency.
Versatile and can be used on both dry or wet, non-cracked concrete.
Styrene free meaning it is odourless.
Typical Applications
- • Threaded rods
- • Balustrading
- • Railings
- • Heavy machinery
- • Structural steel
- • Steel columns
- • Cladding restraints
- • Curtain walling
- • Fencing and gates manufacturing and installation
- • Garage doors and guard rails
| Installation | M8 Capsule | M10 Capsule |
| Capsule size | 8mm | 10mm |
| Drill hole diameter in substrate | 10mm Ø | 12mm Ø |
| Minimum installation depth in substrate | 80mm | 90mm |
| Minimum substrate thickness | 120mm | 130mm |
| Recommended installation torque | 10Nm | 20Nm |
Product Download
PDF Data Sheet
Rawl R-CAS-V Resin Glass Capsule Information Sheet
Installation Advice
1. Drill hole to the required diameter and depth for capsule size being used.
2. Clean the hole thoroughly with brush and hand pump at least four times before installation.
3. Insert capsule into the hole. Connect stud to drilling machine using appropriate driver system.
4. Position the stud into the glass capsule then switch on the drilling machine and drive stud into the capsule. Switch off the drilling machine as soon as the bottom of hole is reached.
5. Leave the anchor undisturbed until the curing time elapses.
6. Attach fixture and tighten the nut to the required torque.
You may be interested in...
Hand held Air Pump to remove dust.
Cleaning Brush to remove debris.
Chemical Anchor Resin bonding agent.
