RHS Parterre Balustrade Screen - Corten Steel
RHS Parterre Decorative Balustrade Panels Designed for Gardens, Exterior and Interior
Half height (1480mm x 930mm) screen designed in collaboration with the Royal Horticultural Society (RHS), manufactured from weathering corten steel.
RHS Parterre - Balustrade Screen - Corten Steel
Options | Material | Finish | Width (mm) |
Height (mm) |
Thickness (mm) |
Code | Price (inc VAT) | Quantity |
---|---|---|---|---|---|---|---|---|
RHS Parterre | Weathering Steel | Corten | 1480 | 930 | 3 | STARK-16S | £390.00 |

Parterre is inspired by 17th plate engravings by Leonard Meager in 1688 and held in the RHS Lindley Library. The laser-cut pattern is an interpretation of a parterre design which was traditionally an intricate, and typically symmetrical, combination of bedding plants and hedges.
Perfect for delineating outdoor spaces, zoning seating areas, hot tubs, raised decks, terraces and gardens.
The weathering steel finish to this large decorative screen creates a raw, and rich textured look. All Corten screens will arrive unweathered.
The panel includes a 25mm x 25mm top fold for extra rigidity.
Specification
- Material: Weathering steel
- Finish: Corten
- Opacity: 55%
- Width: 1480mm
- Height: 930mm
- Thickness: 3mm
- Weight: 27kg
![]() |
Posts and FittingsPosts and fittings are NOT supplied with this Parterre panel; posts, clamps and end caps are available separately. Please see below for further details. |
Please allow 7 to 10 working days from order for manufacture and delivery.
Please Note: |
|
---|---|
![]() |
A delivery surcharge of £40.00 inc VAT. will be applied to each order. |
![]() |
For delivery outside the UK please contact us by phone or email and we will try and find you the best solution. |
Posts, Clamps and End Caps
Surface Mount
If mounting your posts onto a deck or terrace each post will need to be cut to form two 1.1m (1100mm) posts.
First (or stand alone) panel will require: 1 x Post (cut to form 2 x 1.1m posts, 4 x Clamps, 2 x End Caps, 2 x Terrace Feet.
Each subsequent panel will require: 0.5 x post (cut 1.1m), 4 x Clamps, 1 x End Cap, 1 x Terrace Foot.
In Ground Mount
If setting your posts into the ground using concrete you should cut your full height posts down to form two 1.6m (1600mm) posts
First (or stand alone) panel will require: 2 x Posts (cut to form 2 x 1.6m posts), 4 x Clamps, 2 x End Caps.
Each subsequent panel will require: 1 x Post (cut to 1.6m), 4 x Clamps, 1 x End Cap.
Installation Advice
Downloadable PDF guide for installation into the ground or surface mounted (using Terrace Foot).

RHS Parterre Balustrade Screen Installation Guide
Balustrade screens can be used with our tubular and square stainless steel balustrade post and clamp systems when combined with 3mm Plate Infill Clamps to secure your panel in place.
Decorative garden screens and panels are designed here in Britain by Stark and Greensmith and manufactured from recycled materials. |
![]() |
You may be interested in...

Posts for decorative garden screens.

Clamps for decorative garden screens.

End Caps for decorative garden screen posts.

Terrace Foot Base for decorative screen posts.
some
help?
our friendly
technical team on