RHS Parterre Balustrade Screen - Aluminium

RHS Parterre Decorative Aluminium Balustrade Panels for Gardens, Exterior and Interior

Half height (1480mm x 930mm) aluminium screen designed in collaboration with the Royal Horticultural Society (RHS).

RHS Parterre Balustrade Screen - Powder Coated Aluminium

RHS Parterre Balustrade Screen - Aluminium - Dimensions

RHS Parterre Garden Screen - Laser-cut Pattern

RHS Parterre - Balustrade Screen - Aluminium

Options	Material	Finish	Width (mm)	Height (mm)	Thickness (mm)	Code	Price (inc VAT)	Quantity
RHS Parterre	Aluminium	Powder Coated RAL7006	1480	930	3	STARK-16A	£456.00	Special order

Parterre is inspired by 17th plate engravings by Leonard Meager in 1688 and held in the RHS Lindley Library. The laser-cut pattern is an interpretation of a parterre design which was traditionally an intricate, and typically symmetrical, combination of bedding plants and hedges.

Aluminium construction with a high quality powder coated finish to protect from harsh weather conditions.

Perfect for delineating outdoor spaces, zoning seating areas, hot tubs, raised decks, terraces and gardens.

The panel includes a 25mm x 25mm top fold for extra rigidity.

Specification

Material: Aluminium
Finish: Powder Coated RAL 7006 (Beige/Grey)
Opacity: 55%
Width: 1480mm
Height: 930mm
Thickness: 3mm
Weight: 9kg

Posts and Fittings

Posts and fittings are NOT supplied with this Parterre panel; posts, clamps and end caps are available separately. Please see below for further details.

Please call for manufacture and delivery timings.

Please Note:
	A delivery surcharge of £19.99 inc VAT. will be applied to each order.
	For delivery outside the UK please contact us by phone or email and we will try and find you the best solution.

RHS Parterre Balustrade Screen - Aluminium

Posts, Clamps and End Caps

Surface Mount

If mounting your posts onto a deck or terrace each post will need to be cut to form two 1.1m (1100mm) posts.

First (or stand alone) panel will require: 1 x Post (cut to form 2 x 1.1m posts, 4 x Clamps, 2 x End Caps, 2 x Terrace Feet.

Each subsequent panel will require: 0.5 x post (cut 1.1m), 4 x Clamps, 1 x End Cap, 1 x Terrace Foot.

In Ground Mount

If setting your posts into the ground using concrete you should cut your full height posts down to form two 1.6m (1600mm) posts

First (or stand alone) panel will require: 2 x Posts (cut to form 2 x 1.6m posts), 4 x Clamps, 2 x End Caps.

Each subsequent panel will require: 1 x Post (cut to 1.6m), 4 x Clamps, 1 x End Cap.

Installation Advice

Downloadable PDF guide for installation into the ground or surface mounted (using Terrace Foot).

RHS Parterre Balustrade Screen Installation Guide

Balustrade screens can be used with our tubular and square stainless steel balustrade post and clamp systems when combined with 3mm Plate Infill Clamps to secure your panel in place.