Threaded Stud Anchor - 316 Grade Stainless Steel
Threaded Rod with Stud Nut for Secure Installation into Masonry and Concrete
Threaded Stud Anchor
| Options | Grade | Thread | d (mm) |
L (mm) |
Code | Price (inc VAT) | Quantity |
|---|---|---|---|---|---|---|---|
| M8 x 110mm | 316 | M8 | 8 | 110 | 19.4408.110.14 | £2.88 |
M8, M10, M12 and M16 thread stud anchors for installation with injection resin to create a strong anchor point.
Threaded Stud Anchor
| Options | Grade | Thread | d (mm) |
L (mm) |
Code | Price (inc VAT) | Quantity |
|---|---|---|---|---|---|---|---|
| M8 x 110mm | 316 | M8 | 8 | 110 | 19.4408.110.14 | £2.88 | |
| M8 x 205mm | 316 | M8 | 8 | 205 | 19.4408.205.14 | £5.64 | |
| M10 x 130mm | 316 | M10 | 10 | 130 | 19.4410.130.14 | £3.24 | |
| M12 x 155mm | 316 | M12 | 12 | 155 | 19.4412.155.14 | £5.28 | |
| M12 x 175mm | 316 | M12 | 12 | 175 | 19.4412.175.14 | £6.12 | |
| M12 x 265mm | 316 | M12 | 12 | 265 | 19.4412.265.14 | £9.36 | |
| M16 x 205mm | 316 | M16 | 16 | 205 | 19.4416.205.14 | £10.92 |
Tip: To view the product code and full product table on mobile please tilt your device to landscape.
Key Features:
 |
316 grade stainless steel. |
 |
Drill is required for installation. |
 |
Requires use of a Chemical Anchor Resin for installation. |
Threaded rod and stud nut manufactured from 316 (marine) grade stainless steel.
Suitable for both indoor and outdoor applications
Installation is quick and easy with the use of a drill and mortar injection resin.
Masonry Drilling Advice
- M8 stud anchor requires 10mm diameter fixing hole.
- M10 stud anchor requires 12mm diameter fixing hole.
- M12 stud anchor requires 14mm diameter fixing hole.
- M16 stud anchor requires 18mm diameter fixing hole.
Dimension Information:
PDF Data Sheet
Download Threaded Stud Anchor Dimension Information
Installation Advice
 1. Drill fixing hole. |
 2. Clean with air pump to remove dust and debris. |
 3. Clean with brush to remove any rough debris. |
 4. Clean again with air pump to achieve the perfect fixing surface. |
 5. Insert chemical anchor injection resin. |
 6. Insert anchor - Rotate to achieve a solid fixing. |
 7. Allow to set - Approximately 45 minutes, dependent on temperature. |
 8. Finish with screw. |
You may be interested in ...
Chemical Anchor Resin bonding agent.
Hand held Air Pump to remove dust.
Cleaning Brush to remove debris.
