Top Mount Base Profile for Glass Balustrade
Aluminium Top Mount Base Profile for Frameless Pro Glass Balustrade
Top Mount Base Profile - Frameless Pro Glass Balustrade
|Drainage Holes||Fixing Hole Ø
|Material||Code||Price (inc VAT)||Quantity|
|Manufactured from aluminium.|
|Stainless steel effect satin finish.|
|Adjustable Safety Wedge Kits available separately.|
|Anchor Bolts for masonry mounting available separately.|
|120mm x 10mm Wood Screws for timber* mounting available separately.|
Top Mount Base Profile with U-Shaped Channel to accept Balustrade Glass
Aluminium with a stainless steel effect finish, for indoor and outdoor use.
Available in lengths of 2500mm or 5000mm.
Will accept mono and laminated glass thickness of 12mm - 21.52mm.
Pre-drilled with 14mm mounting holes at a spacing of 200mm, allowing for fewer anchors.
Supplied with connector pins for perfect alignment with other profiles.
Integrated water drainage channels.
Suitable for mounting onto concrete, masonry and timber*.
Combine with the Adjustable Safety Wedge Kit to allow for glass adjustment in every direction by up to 10mm - from inside the balustrade.
Important:If installing onto timber* please take advice from an engineer or structural specialist.
The Essential Partner
High Performance Anchor Bolt, Hexagon head,
|Lengths over 1.5 metres will attract a delivery surcharge of £19.99 inc VAT.
This applies to the United Kingdom only.
|Lengths over 1.1 metres are not eligible for international delivery.
Please contact us by phone or email and we will try and find you the best solution.
Typical Top Mounting Frameless Pro Glass Balustrade Components
Installation Advice - Frameless Pro Glass Balustrade
Video: Top Mount Frameless Pro Glass Balustrade Installation - S3i Group
Top Mount Frameless Pro Glass Balustrade Installation Advice. An easy to understand guide to fitting a top mounting glass balustrade with the Frameless Pro glass channel system.
Need some help?
Download and print our installation advice sheet for Top Mount Frameless Pro Glass Balustrade.
Top Mount Connection Advice - Frameless Pro Glass Balustrade
Base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.
CAD Drawing Download
CAD File (dwg)
(Compatible software required)
You may be interested in...
Inner Corner Base Profiles - Top Mount Frameless Pro Glass Balustrade.
Outer Corner Base Profiles - Top Mount Frameless Pro Glass Balustrade.
Rubber Insert and Safety Wedge Kit adjustable design for glass alignment.
Anchor Bolts in marine grade stainless steel and zinc plated finishes.