Top Mounting F Shaped Base Profile - Frameless Pro Glass Balustrade

Aluminium ´F´ Shaped Base Profile for Glass Channel Balustrade

Top Mount F Shaped Base Profile - Frameless Pro Glass Balustrade

Available Options	Length (mm)	Drainage Holes	Fixing Hole Ø (mm)	X (mm)	Material	Code	Price (inc VAT)
2500mm	2500	Yes	14	50	Aluminium	16.6909.000.18	£444.60
5000mm	5000	Yes	14	100	Aluminium	16.6909.500.18	£871.92

Key Features:

	Manufactured from aluminium.
	Anodised stainless steel effect finish.
	Adjustable Safety Wedge Kits available.
	High performance Anchor Bolts for masonry mounting available.
	Wood Screws for timber* mounting available.

'F' Shaped Base Profile with U-Shaped Channel to accept Balustrade Glass

Aluminium with an anodised stainless steel effect finish, suitable for both indoor & outdoor use.

Supplied in lengths of in lengths of 2500mm or 5000mm.

Pre-drilled with 14mm mounting holes at a spacing of 200mm, allowing for fewer anchors.

Designed to accept mono and laminated glass thickness of 12mm - 21.52mm.

Connector pins supplied for quick and easy alignment with other profiles.

Integrated water drainage channels.

Suitable for mounting onto masonry and timber*.

Combine with the Adjustable Safety Wedge Kit to allow for glass adjustment in every direction by up to 10mm - from the inner side of the balustrade.

Important:

If installing onto timber* please take advice from an engineer or structural specialist.

The Essential Partner

High Performance Anchor Bolt, Hexagon head,
M8 thread in stainless steel or zinc plated steel, for mounting onto concrete or masonry.

Please Note:
	Lengths over 2.5 metres will attract a delivery surcharge of £40.00 inc VAT. This applies to the United Kingdom only.
	Lengths over 1.8 metres are not eligible for international delivery. Please contact us by phone or email and we will try and find you the best solution.

Typical Top Mounting ´F´ Shaped Frameless Pro Glass Balustrade Components

Installation Advice - ´F´ Shaped Frameless Pro Glass Balustrade

Need some help?

Download and print our installation advice sheet for Top Mount 'F' Shape Frameless Pro Glass Balustrade.

´F´ Shape Profile Connection Advice - Frameless Pro Glass Balustrade

´F´ shaped base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.