Wireteknik A210 Swaging Machine
A210 Wireteknik Swaging Machine complete with Hydraulic Hand Pump
A210 Wireteknik portable roll swaging machine for swaging rigging hardware to stainless steel wire rope, with low weight and small outer dimensions making it extremely portable.
Wireteknik Swaging Machine A210
| Options | Swaging Range (mm) |
Code | Price (inc VAT) | Quantity |
|---|---|---|---|---|
| A210 | 1.6 - 8 | WT-A210 | POA | |
| Die 1.6mm | 1.6 | WT-A210-016 | POA | |
| Die 2.5mm | 2.5 | WT-A210-025 | POA | |
| Die 3mm | 3 | WT-A210-030 | POA | |
| Die 4mm | 4 | WT-A210-040 | POA | |
| Die 5mm | 6 | WT-A210-050 | POA | |
| Die 5.5mm | 5.5 | WT-A210-055 | POA | |
| Die 6mm | 6 | WT-A210-060 | POA | |
| Die 7mm | 7 | WT-A210-070 | POA | |
| Die 8mm | 8 | WT-A210-080 | POA |
The A210 includes a hand pump. All machines include full sets of pullers.
Fully approved by Lloyds Register of Shipping.
Swaging range: 1.6mm (1/16 in) to 8mm (5/16 in).
Note: Roller Die Sets sold separately, Please contact us for full brochure.Machine dimensions: Length 590mm x Width 280mm x Height 90mm.
Weight: 10 kg.
Dimensions of hydraulic hoses and connections: 1/4”, 3/8” and 1/2”.
Operating temperature: 0–30°C.
Please Note: Delivery charge of £24.00 inc VAT applies to Wireteknik Swaging Machine.
Typical Applications
- Standing rigging and lifelines for sailboats
- Architectural balustrades, railings, and cable systems
- Suspension applications and supporting stage scenery in theatres
- On-site swaging of wire rope fall protection systems for roofs and buildings
- Structural rigging for hang gliders and ultralight aircraft
- Swaging of winch wire ropes for oceanographic surveying and research equipment
- Structural rigging for tensile sail roofs and shade sail systems
Operating Instructions
NB! It is important to choose the roller dies corresponding to the dimensions of the wire and terminal. The roller dies are marked with the wire dimensions they are to be used for.
Use protective glasses to minimise the risk of eye injuries. Protective gloves, shoes and clothing should be worn to avoid cutting and crushing injuries.
Important It is of utmost importance that terminals are not made of other materials than intended. Otherwise they may crack and/ or not comply with the standard, and will not have sufficient performance.
PDF Operating Sheet
Download Wireteknik A210 Swaging Machine Operating Sheet
General Description of Swaging
1. Choose the roller dies that correspond to the wire diameter, and slip them onto the cogwheel synchronizing pins.
2. Mount the pulling tool on the drawbar and attach the terminal to it. Adjust the length so the roller dies meet the terminal shank at desired position.
3. Apply hydraulic power to fasten the terminal between the roller dies. Insert the wire to the bottom of the terminal throat and mark the wire.
4. Move the transparent protective shield into position. Apply hydraulic pressure to pull the terminal through the roller dies.
5. When the roller dies rotate, they will press the terminal shank onto the wire.
6. Measure the diameter of the terminal after swaging and compare it to the swage dimensions table (below)
Wire Swaging Dimensions
| Wire Size (mm) | Diameter Before Swaging (mm) | Diameter After Swaging (mm) |
| 1.6 | 3.94 - 4.06 | 3.40 - 3.50 |
| 2.5 | 5.41 - 5.53 | 4.70 - 4.82 |
| 3 | 6.22 - 6.35 | 5.44 - 5.56 |
| 4 | 7.42 - 7.54 | 6.23 - 6.35 |
| 5 | 9.00 - 9.12 | 7.83 - 7.95 |
| 5.5 | 10.72 - 10.84 | 9.35 - 9.50 |
| 6 | 12.42 - 12.54 | 10.95 - 11.12 |
| 7 | 14.18 - 14.30 | 12.50 - 12.70 |
| 8 | 16.01 - 16.13 | 14.07 - 14.30 |
Optional Hydraulic Power Units
Range of Electro Hydraulic Power Units and Air/Hydraulic Foot Pumps available.
Please contact our Sales and Technical Team for pricing and further information on 01302 752 504 or email us info@s3i.co.uk.
Real People
Real Help
