Cable Display Kit - Wall to Wall Mount
Easy Fit Cable Display and Wire Hanging Kit - Wall Mount
Cable Display Kit - Wall to Wall Mount
Options | Cable Length (mm) |
Cable Ø (mm) |
Bracket Tensioners | Code | Price (inc VAT) | Quantity |
---|---|---|---|---|---|---|
Cable Display Kit | 4000 | 2.5 | 2 | Display-002 | £30.24 |
Tip: To view the full product table on mobile please tilt your device to landscape.
Key Features:
![]() |
2.5mm Ø, 7x7 stainless steel wire rope. |
![]() |
Self-tensioning wall brackets. |
![]() |
Chrome finish. |
![]() |
Screw fixings are NOT supplied. |
Wall Mount ´Easy Fit´ Cable Display Kit.
Create a stylish wall mounted cable display quickly and easily. Supplied with two wall bracket tensioner fittings and stainless steel wire rope for you to trim to size.
Wall bracket tensioners have adjustable elbows, allowing for perfect positioning every time.
6 x No.6 Countersunk Screws required for installation.
Each Kit Includes:
- 2 x Self-tensioning Wall Brackets.
- 4 Metres of 2.5mm Diameter 7x7 Stainless Steel wire Rope.

Wall bracket tensioners are suitable for direct installation onto wood, we would always recommend using a plastic/rawl plug for mounting on to other materials.
Designed to accept horizontal and vertical supports from the ´Easy Fit´ cable display and wire hanging system.
Important
Always check that mounting surfaces are strong enough to take the weight of the items being displayed. No responsibility will be taken for incorrect loading. This responsibility rests with the installer.
![]() |
Need Some Support?This display kit only accepts shelf and signage supports from the ´Easy Fit´ Cable Display range. |
Installation Advice
Need some help?Download and print our installation advice sheet for the Wall Mount Cable Display Kit. |
![]() |
We recommend marking the position of the top tensioner first and using a plumb line to mark the position for the bottom tensioner.
You can place shelf supports and connectors onto the wire rope before connecting both ends - supports can be adjusted to the correct position once the wire has been tensioned.
Wall Bracket Tensioner
1. Use suitable no.6 countersunk screws to secure bracket base plate to mounting surface.
2. Unscrew the end fitting.
3. Press the end fitting towards the body and insert wire rope firmly until it locks in place.
4. To fully secure the wire, screw the end fitting back towards the main body.

You may be interested in...

Stainless steel No.6 Pozi Countersunk Wood Screws.

Single Shelf Support - Adjustable cable display clamp.

Double Shelf Support - Adjustable cable display clamp.

Single Shelf Support - Fixed position cable display clamp.