Fork Wire Rope Assembly - Adjustable - Stainless Steel
Made to Measure Fork to Fork, Stud Cable Assembly - 316 Grade Stainless Steel
Wire rope assembly with threaded stud and fork end fittings, with 1x19 strand wire rope, each cable is made to measure with all components produced from 316 marine grade stainless steel.
Note: Orders placed before Christmas
Due to the busy festive period made-to-order products such as wire rope assemblies ordered after 12th December are unlikely to be manufactured until the New Year.
Orders can be placed online at any time over the Christmas period and will be manufactured as quickly as possible upon our return in January 2024.
Fork and Fork - Adjustable - Wire Rope Assembly
|Wire Construction||Thread||Jaw Width
|Code||Price (inc VAT) (Length in metres: 1 metres)|
|5mm x M8 Fork Assembly||5||1 x 19||M8||10||8||WR-AFF-05||£29.66|
NB: Please use the calculator (above right) to work out the cost to your specific dimensions.
Tip: To view the product code and full product table on mobile please tilt your device to landscape.
Supplied with one left hand and one right hand thread fork end fitting to allow for easy adjustment.
Handmade To Order
Please allow 7 to 10 working days from order for manufacture and delivery.
Each wire rope assembly is made to your dimensions and consists of:
- One length of 1x19 stainless steel rope
- Fixed threaded swage stud at each end
- Threaded fork with clevis pin at each end
Adjustment to tension on the wire can be achieved by rotating the fork end fittings.
Safety tip: you should only unscrew fork ends the maximum length stated.
We recommend the maximum thread exposure at each individual end should be:
- 5mm Ø x M8 = 13mm
1x19 Wire Rope
1x19 stainless steel wire rope is stronger than other types of stainless steel cable and has less stretch. This also means it is non flexible and does not allow for kinks or bends.
1x19 stainless steel wire rope is often used in yacht and sail boat rigging, architectural structural rigging and balustrades.
How to measure your wire rope assembly:
Please provide us with the pin centre to pin centre cable assembly measurements.
Dimensions of the forks for each end of the wire rope assembly. You may need these dimensions to aid in specifying the type of eye or lug attachment.
|WØ (Wire Rope)||TH||L (mm)||L1 (mm)||D (mm)||D1 (mm)||H (mm)||B (mm)|
|Ø (Wire Rope)||TH (Thread)||L (mm)||L1 (mm)||L2 (mm)||D (mm)|
Safe Working Loads for Wire Rope Assemblies
All wire rope assemblies are manufactured to achieve the safe working load of the wire type and diameter specified.
Please refer to the wire rope safe working loads as follows: