Gripple Express Hanger Kits
Gripple Express Range and Wire Rope Kits with Pre-crimped End Fixing
The fastest locking device available for quick and easy suspension. Supplied in ready-to-use packs of 10, simply choose your size, wire length and end fixing.
|
|
|
||||||
|
|
|
|
||||
|
|
||||
|
Gripple Express hangers are designed with an innovative and easy to use keyless release mechanism, allowing for rapid installation and adjustment.
Express No.1 (XP1) is perfect for signage, shop fitting, lighting and suspension of other lightweight fixtures.
Express No.2 (XP2) is ideal for HVAC, mechanical and electrical applications.
Gripple Express hangers can be installed up to 6 times faster than traditional hanging systems such as threaded rod.
Ergonomic buttons allow for quick and easy adjustment.
Load rated safe working load with a 5:1 safety factor.
Aesthetically discreet and lightweight.
Supplied as a ready-to-use kit.
Express Hanger Kits contain:
- 10 x Gripple Express fasteners
- 10 x Galvanised wire rope to your chosen length
- 10 x Pre-crimped end fixings
Choosing the Right Gripple Express
Use the simple formula below to determine the correct Gripple Express size required.
´Weight per metre x distance between hangers´
Example:
20kg load per metre x 2m between hangers = 40kg
Installation and Adjustment of Express Hanger
1. Simply pass the end of your wire rope through the Gripple Express.
2. Loop wire rope back on itself and pass back through the hanger fitting. Simply pull on the wire rope end to tighten, ensure a minimum of 75mm of tail wire exits the hanger.
3. To adjust or remove your Gripple fitting simply press the release buttons to unlock the wire rope locking wedge.
End Fixings for Gripple Express
Gripple offer a wide range of pre-crimped end fixings, from loops, threaded studs, hooks and many more, providing a solution whatever the application.
|
|
For further information on any Gripple products you can contact our technical team on 01302 752504 or email us at info@s3i.co.uk