D Shackle - Duplex Stainless Steel
Lifting D Shackle with Split Pin in Duplex D6 Stainless Steel
Lifting D Shackle - Duplex Stainless Steel
|Code||Price (inc VAT)||Quantity|
|9mm D Shackle||9||8||33||18||M10||500||2000||DX-D-090||£17.29|
|13mm D Shackle||13||12||40||25||M14||1250||5000||DX-D-130||£31.84|
|17mm D Shackle||17||16||60||32||M18||2000||8000||DX-D-170||£61.49|
|21mm D Shackle||21||19||78||41||M22||3200||12,800||DX-D-210||£117.74|
|29mm D Shackle||29||25||109||56||M30||5000||20,000||DX-D-290||£256.22|
|38mm D Shackle||38||34||152||76||M39||13,000||52,000||DX-D-380||£597.28|
Tip: To view the product code and full product table on mobile please tilt your device to landscape.
|Duplex stainless steel.|
|*Quoted break load.|
D Shackle in Duplex D6 - AISI 318LN stainless steel construction.
Metric screw thread with spilt pin for added safety.
Available in a choice of M12, M14, M18, M22, M30 and M38 Threads.
Grade 60, Safety coefficient 4.
Temperature environment range of -40°C to 350°C.
Manufactured in Italy by Carcano.
*Break loads and WLL specifications are only valid for correct axial single-line suspension without spreading.
Inspect Regularly: Before each use, carefully inspect the D shackle for any signs of wear, damage, or deformation. Check for cracks, elongation, or other issues that may compromise its integrity. If any problems are detected, remove the shackle from service and replace it.
Pin Securement: Ensure that the pin of the D shackle is correctly secured when connecting it to other rigging components. The pin should be fully engaged and secured with the appropriate split pin.
Proper Loading: When using D shackles, make sure the load is applied correctly and evenly to the shackle's body and not concentrated on the pin. Off-centre or unbalanced loading can cause excessive stress on the shackle and reduce your shackle load capacity