Bar Railing Bracket - Ball End Pillar - Chrome

Bar Railing Bracket - Ball End Pillar - Chrome Finish

Ball Design Bracket Support in Polished Chrome Finish for for 38.1mm Tubular Handrail

Chrome post bracket for terminating handrail ends, suitable for attaching to the side of counters and bars to provide a strong and secure grab/handrail support.

Bar Railing Bracket - Ball End Pillar - Chrome Finish

Bar Railing Bracket - Ball End Pillar - Dimensions

Bar Railing Bracket - Ball End Pillar - Installation

Bar Railing Bracket - Ball End Pillar

Options	Finish	Ø (mm)	B (mm)	D (mm)	H (mm)	H2 (mm)	Code	Price (inc VAT)	Quantity
38.1mm Ø Tube	Chrome	38.1	48	70	70	97	11.0601.038.23	£18.96	In stock

Tip: To view the product code and full product table on mobile please tilt your device to landscape.

Key Features :

	Chrome Finish.
	To fit 38.1mm diameter tube.
	Manufactured from Zintec/Protectan.
	Countersunk screws are supplied for installation.
	For installation you will require a few simple household tools.

Bar railing end post to accept 38.1mm (1.5 inch) diameter tube.

Suitable for indoor use only.

Two countersunk fixing points for secure attachment.

Screw fixings supplied for direct installation on to hardwood surfaces.

Quick and easy installation with the use of a few household tools.

Tubular rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.

Designed for use on horizontal surfaces only. Do Not use as a handrail wall bracket.

We would always recommend spacing bar railing brackets no more than 700 mm apart.

Dimensions

Height (H2): 97mm
Height to rail centre (H): 70mm
Base diameter (D): 70mm
Ball depth (B): 48mm

Bar Railing Bracket - Ball Pillar Positions

Important

Bar railing brackets should only be matched with similar design style, ie: Ball Pillar to Ball Pillar, this is due to differing heights between styles.

Installation Advice

1. Start by marking the fixing position of the ball end pillar and secure in place using the screws provided (you may wish to use your own screws dependent upon mounting surface).

Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.

2. Once tube is correctly positioned, simply re-tighten the grub screw to secure tube.