Bar Railing Bracket - Ball Centre Pillar - Chrome Finish

Ball Design Support with Through Hole in Polished Chrome for 38.1mm Tubular Handrail

Bar handrail bracket in hard-wearing chrome, suitable for attaching to the side of counters and bars to provide a strong and secure grab/handrail support.

Bar Railing Bracket - Ball Centre Pillar

Options Finish
Code Price (inc VAT) Quantity 
38.1mm Tube Chrome 38.1 40 70 70 97 11.0600.038.23 £16.03
In stock

Tip: To view the product code and full product table on mobile please tilt your device to landscape.

Key Features :

Chrome Finish
Chrome Finish.
38.1mm Diameter Tube
To fit 38.1mm diameter tube.
Manufactured From Zintec
Manufactured from Zintec/Protectan.
Screw Fixings Supplied
Countersunk screws are supplied for installation.
Household Tools Required
For installation you will require a few simple household tools.

Bar railing mid post to accept 38.1mm (1.5 inch) diameter tube.

Suitable for indoor use only.

Two countersunk fixing points for secure attachment.

Screw fixings supplied for direct installation on to hardwood surfaces.

Quick and easy installation with the use of a few household tools.

Tubular rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.

Designed for use on horizontal surfaces only. Do Not use as a handrail wall bracket.

We would always recommend spacing bar railing brackets no more than 700 mm apart.


  • Height (H2): 97mm
  • Height to rail centre (H): 70mm
  • Base diameter (D): 70mm
  • Ball depth (B): 40mm
Bar Railing Bracket - Ball Pillar Positions


Bar railing brackets should only be matched with similar design style, ie: Ball Pillar to Ball Pillar, this is due to differing heights between styles.

Bar Rail Bracket Style Guide

Installation Advice

1. Start by marking the fixing position of the ball centre pillar and secure in place using the screws provided (you may wish to use your own screws dependent upon mounting surface).

Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.

2. Simply re-tighten the grub screw to secure tube firmly in position. To finish open tube ends neatly you can opt for a stylish End Cap or use a Ball End Pillar.

You may be interested in...

Tube - Chrome Finish

Tube with Chrome Finish for bar rail fittings.

Bar Railing Bracket - Ball End Pillar

Ball End Pillar bracket support for bar railing.

Tube Connector - Chrome

Tube Connectors for bar railing.

Tube End Caps

Tube End Caps for the perfect finishing touch.

Select your product
Show prices