- Balustrade Systems
- Glass Balustrade
- Frameless Glass Balustrade
- Ready Made Handrails
- Balustrade Wire Kits
- Wire Trellis Kits
- Cable Display Systems
- Interior Fittings
- Door Furniture & Fittings
- Wire Rope Fittings & Hardware
- Lifting Gear & Rigging Equipment
- Wire Rope Assemblies
- Wire Rope Tools & Cutters
- Stainless Steel Shackles
- Tie Bar Systems
End Post - Flush Mount - 10mm Bar Railing - Brass Finish
End Post with PVD Coated Brass Finish, Push Fit Fixing Point for Single 10mm Mini Rail
Mini rail end post for 10mm diameter rod and bar, designed for direct installation into wood furniture and shelving (drilling required).
10mm Bar Railing - Post - Flush Mount - Brass Finish
|Pack Size||Code||Price (inc VAT)||Quantity|
|Designed to accept 10mm Diameter Rod and Bar.|
|For installation you will require a few simple household tools.|
End post manufactured from Zamak with a PVD coating to give a hard-wearing brass finish (Not solid brass).
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating, offering good impact strength, excellent abrasion resistance and durability.
Simple push fit fixing. Note: Requires 14mm hole depth for installation.
Installed post height of 71mm.
Ideal for display shelving in restaurants, public houses and commercial settings.
Perfect for boats, caravans and motorhomes to provide a protective rail.
Optional post adapters for corners and angles available.
Always start by marking your post positions, ensuring you have the correct number of posts and lengths of 10mm Ø rail.
Drill a 14mm deep reception hole using a 8mm Ø drill bit.
Simply insert your post directly into the hole ensuring it sits flush, if needed you can tap posts gently in to position using a soft rubber hammer, do not use a metal hammer as this will damage your post.