- Balustrade Systems
- Glass Balustrade
- Frameless Glass Balustrade
- Ready Made Handrails
- Balustrade Wire Kits
- Wire Trellis Kits
- Cable Display Systems
- Interior Fittings
- Door Furniture & Fittings
- Wire Rope Fittings & Hardware
- Lifting Gear & Rigging Equipment
- Wire Rope Assemblies
- Wire Rope Tools & Cutters
- Stainless Steel Shackles
- Tie Bar Systems
Mid Post - Flush Mount - 6mm Bar Railing - Brass Finish
Mid Post with PVD Coated Brass Finish, Push Fit Fixing Point for Single 6mm Gallery Rail
Single mini rail centre post with through hole for 6mm diameter bar, designed for direct installation into wood furniture and shelving (drilling required).
6mm Bar Railing - Post - Flush Mount - Brass Finish
|Pack Size||Code||Price (inc VAT)||Quantity|
|Designed to accept 6mm Diameter Rod and Bar.|
|For installation you will require a few simple household tools.|
Mid post manufactured from Zamak with a PVD coating to give a hard-wearing brass finish (Not solid brass).
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating, offering good impact strength, excellent abrasion resistance and durability.
Simple push fit fixing. Note: Requires 14mm hole depth for installation.
Installed post height of 38mm.
Perfect for boats, caravans and motorhomes to provide a protective galley rail.
The ideal finishing touch for restaurants, public houses and other commercial settings.
Optional post adapters for corners and angles available.
Always start by marking your post positions, ensuring you have the correct number of posts and lengths of 6mm Ø rail.
Drill a 14mm deep reception hole using a 4mm Ø drill bit.
Simply insert your post directly into the hole ensuring it sits flush, if needed you can tap posts gently in to position using a soft rubber hammer, do not use a metal hammer as this will damage your post.