Decorative Rope Handrail Bracket - Polished Brass
Rope Handrail Bracket to Fit 24mm Diameter Rope
Handrail bracket with polished brass finish for 24mm Ø decking rope in the garden and crowd control rope barriers.
Rope Handrail Bracket - Brass
|Code||Price (inc VAT)||Quantity|
Commonly used on decking posts, garden landscaping, handrail & stair ropes, and barrier ropes.
Will accept 24mm diameter rope.
High quality polished brass finish.
Four fixing points for a secure installation.
Fixing screws included.
Can be mounted against most solid surfaces.
Rope is secured in place using the centre screw, this allows you to be in control of the size of rope drop required.
Supplied as individual component.
Please Note: If used as a banister this decorative bracket should not be used as a load bearing bracket.
Brackets are designed for our 24mm decking and barrier rope and we cannot guarantee that rope sourced elsewhere will fit our end fittings.
- Outer Mount Diameter (D): 34.5mm
- Inner Mount Diameter (D1): 25mm
- Base Diameter (D2): 47.5mm
- Height (H): 82mm
- Neck Height (H): 52mm
- Top Depth (W): 16mm
- Screw Length: 1 1/4 inch
Strong and hard wearing synthetic rope with authentic look and feel just like natural rope.
Simply screw your bracket into place using the mounting screws provided,
Tip: if mounting on to brickwork or masonry use a rawl/wall plug (not included) to ensure a secure fixing.
Remove the central screw and pass your rope through the reception hole, once in position simply replace the central screw to secure your rope.
Tip: if using strong or tough natural rope, you may need to tape and drill your rope to accept the central screw.
Questions & Answers