- Balustrade Systems
- Glass Balustrade
- Frameless Glass Balustrade
- Ready Made Handrails
- Balustrade Wire Kits
- Wire Trellis Kits
- Cable Display Systems
- Interior Fittings
- Door Furniture & Fittings
- Wire Rope Fittings & Hardware
- Lifting Gear & Rigging Equipment
- Wire Rope Assemblies
- Wire Rope Tools & Cutters
- Stainless Steel Shackles
- Tie Bar Systems
End Post - Flush Wood Mount - 6mm Bar Railing System
End Post with Push Fit Fixing Point for Single 6mm Gallery Rail
Single mini rail end post designed for direct installation into wood furniture and shelving.
6mm Bar Railing - End Post - Flush Wood Mount
|Pack Size||Code||Price (inc VAT)||Quantity|
|Manufactured from Zintec.|
|Designed to accept 6mm Diameter Rod and Bar.|
|For installation you will require a few simple household tools.|
End post designed to accept 6mm tubular rod, ideal for display shelving in restaurants, public houses and other commercial settings.
Perfect for boats, caravans and motorhomes to provide a protective rail.
Note: Requires 14mm hole depth for installation.
Manufactured from Zintec with a protective stainless steel effect finish.
Zintec is a cold rolled mild steel that has been electronically coated thin layer of zinc.
Installed post height of 38mm.
Single push fit fixing.
Optional post adapters for corners and angles available.
End Post Installation Advice
Always start by marking your post positions, ensuring you have the correct number of posts and lengths of 6mm Ø rail.
Drill a 14mm deep reception hole using a 4mm Ø drill bit.
Simply insert your post directly into the hole ensuring it sits flush, if needed you can tap posts gently in to position using a soft rubber hammer, do not use a metal hammer as this will damage your post.