Glass Holder - Bottom Support - Flat Mount

Lower Glass Support for 8mm - 13.53mm Glass, Flat Mount on to Balustrade Posts.

New Product

New Glass Holder for glass balustrade arriving soon!

Glass Holder - Bottom - Flat Mount

Options	Grade	Glass Thickness (T) (mm)	H (mm)	Code	Price (inc VAT)	Quantity
8-8.76mm Glass	316	8 - 8.76	15 - 15.5	14.5508.000.02.GC	£28.92	2-3 Weeks
10-10.76mm Glass	316	10 - 10.76	14.5	14.5510.000.02.GC	£28.92	2-3 Weeks
11.52mm Glass	316	11.52	14	14.5554.000.02.GC	£28.92	2-3 Weeks
12-12.76mm Glass	316	12 - 12.76	13.5	14.5512.000.02.GC	£28.92	2-3 Weeks
13.52mm Glass	316	13.52	13	14.5564.000.02.GC	£28.92	2-3 Weeks

Tip: To view the product code and full product table on mobile please tilt your device to landscape.

Key Features:

	Flat mount.
	316 grade (exterior) stainless steel.
	To a superb brushed 320 grit satin finish.
	8mm - 13.52mm Glass.
	M6 x 25mm Countersunk Hex Head Screws required for mounting into M6 threads.
	Requires use of a Hex Head Key for installation.

Bottom glass holder with rubber inlay and flat mounting adapter for glass balustrade.

Supplied with a size specific rubber insert for mono and laminated glass.

Options for mono glass thickness of 8mm, 10mm and 12mm.

Options for laminated glass thickness of 8.76mm, 10.76mm, 11.52mm, 12.76mm and 13.52mm.

Produced from 316 grade stainless steel with a brushed satin finish.

Flat mounting adapter suitable for square and rectangular posts.

Designed for horizontal glass balustrade.

Holder dimensions: Height: 33mm, Length: 75mm, Depth: 34mm.

Simply combine with a Top Glass Holder for a stylish finish.

Note: Post mounting screws available separately.

The Essential Partner

Stainless steel M6 x 25mm Countersunk Screws with Hexagon Head for mounting into M6 threads.

M6 x 25mm Countersunk Screw with Hexagon Head

Download

PDF Data Sheet

Bottom Glass Holder - Flat Mount - Data Sheet

Installation Advice

Tip: Always start with your bottom holder glass holder first.

1. Start by marking your mounting position and drill a M6 thread hole. Using a M6 x 25mm countersunk screw (available separately) attach the mounting adapter in to position.

2. Loosen grub screw on underside of glass holder and place on to mounting adapter, re-tighten the underside grub screw to secure holder in place.

3. Please ensure glass surfaces are clean before placing rubber insert and glass infill in to glass holder.