Lifting Clevis Grab Hook with Safety Pin - Grade 80
G80 Clevis Grab Hook with safety Pin for Lifting Chain Slings - Tested and Certified
Chain grab hook with tested clevis pin and easy to use safety pin in grade 80 alloy steel for lifting chain applications.
Lifting Clevis Grab Hook - Safety Pin - G80
|Code||Price (inc VAT)||Quantity|
Dimensions: For full product dimensions please view this page on a tablet, laptop or desktop computer.
|High tensile grade 80 alloy steel.|
|Quoted working load limit.|
|Conforms to European Standard EN 1677-1.|
Working load limit range of 2 Tonne up to 8 Tonne (Never Exceed WLL).
Clevis grab hook with safety pinavailable for 7mm, 8mm, 10mm, 13mm and 16mm diameter lifting chain.
Super alloy steel construction.
Fatigue rated x 1.5 Working Load Limit (WLL) for 20,000 cycles
Proof tested - 2.5 times Working Load Limit.
100% Magnaflux crack detected.
All load pins are 100% individually inspected and tested.
Red painted finish.
Conforms to EN 1677-1.
Safety factor 4:1
Each Clevis Grab Hook is supplied with the relevant certification.
We recommend only using Grade 80 Grab Hooks with Grade 80 Chain and Components.
Note: As you may expect because these products are often used in critical safety applications any returns will be carefully inspected for signs of usage prior to any refunds being offered.
PDF Data Sheet
You may be interested in...
Tested and Certified Lifting Chain Slings
Full range of chain sling lengths and end fittings to suit your requirements.