Lifting D Shackle - Stainless Steel - Socket Head Pin
Tested and Certified Lifting D Shackle - Socket Pin - 17/4PH High Tensile Stainless Steel
Tested and certified stainless steel D shackle for general lifting applications - Supplied with standard pin: Type C - countersunk screwed pin with socket head.
Lifting D Shackle Socket Head Pin
|Code||Price (inc VAT)||Quantity|
|PH1-C Lifting D Shackle||10||8||16||32||1||PH-010-C||£30.74|
|PH2-C Lifting D Shackle||12.7||10||20||40||2||PH-020-C||£34.86|
|PH3-C Lifting D Shackle||16||12.7||25||50||3||PH-030-C||£43.63|
|PH5-C Lifting D Shackle||19||16||32||64||5||PH-050-C||£70.34|
|PH7-C Lifting D Shackle||22.2||19||38||76||7||PH-070-C||£119.06|
|PH9-C Lifting D Shackle||25.4||22.2||44||88||9||PH-090-C||£185.53|
|PH11-C Lifting D Shackle||28.6||25.4||51||102||11||PH-110-C||£270.70|
|PH13-C Lifting D Shackle||31.8||28.6||57||114||13||PH-130-C||£476.82|
|PH15-C Lifting D Shackle||34.9||31.8||64||128||15||PH-150-C||£655.84|
|PH18-C Lifting D Shackle||38||34.9||70||140||18||PH-180-C||£870.92|
Made In Britain
This stainless steel lifting D shackle with socket head screw pin is manufactured here in the UK.
PH Lifting Shackles - High Tensile Stainless Steel
PH LIFTING SHACKLE TECHNICAL SHEET download here
PH High Tensile Lifting Shackles - 17/4 stainless steel, UK Made, Certified and CE marked SWL
PH lifting shackles are manufactured from 17/4 stainless steel and are proof-tested to twice their safe working load (SWL) using equipment calibrated to BS EN 10002-2 and NAMAS NIS 0424
Our 17/4 PH stainless lifting shackles are available in 3 pin types
PH Shackle Product Marking
Each and every lifting shackle which details the CE mark is individually tested and identified.
The identification number not only provides a trace to the SWL test but also to the batches of material used.
This means that from any shackle we can trace right back to material source and provide material/mill certificates relative to the materials used for that part.
Inspection of Lifting Shackles before use
Before any piece of equipment is first put into use it should be examined for signs of damage.
If it is known, or suspected, that the equipment has been subjected to an excess load or it shows any sign of cracking, splitting or deformation it must be destroyed.
It is required that the equipment is regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure.
Inspection should take place at least every 6 months and even more frequently when the equipment is used in severe operating conditions.
Other Lifting Products
Lifting Turnbuckles - Tested and certified turnbuckles, engineered for lifting applications.
Tufnol Lifting Blocks - Proof tested and supplied with test batch ID and full certification.
Safety Shackles - Ideal for applications where corrosion resistance is of significant importance.