Bar Foot Rail Bracket - Combination Mount - Brass
Classic Bracket Support with PVD Coated Brass Effect Finish for Tubular Bar Foot Rails
Foot rail bracket designed to accept 38.1mm and 50.8mm diameter tube from our bar railing range.
Bar Foot Rail Bracket - Combination Mount
|Options||Finish||Tube Ø||Material||Code||Price (inc VAT)||Quantity|
Zamak Construction - PVD Coating
Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.
Key Features :
|Brass effect finish.|
|Option for 38.1mm diameter tube.|
|Option for 50.8mm diameter tube.|
|Countersunk screws are supplied for installation.|
|For installation you will require a few simple household tools.|
Combination mount bar foot rail bracket with a classic high polished brass effect finish for internal use.
This popular style of bracket is attached to the floor and bar face offering a secure and strong fixing.
Available for both 38.1mm (1.5 inch) and 50.8mm (2 inch) diameter tube.
Two countersunk fixing points for attachment to bar face.
The bracket foot simply sits on the floor to take all the weight.
Tubular foot rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.
Manufactured from Zamak with a PVD coating to give a hard-wearing brass finish (Not solid brass).
These foot railing supports should never be wall mounted for use as handrail support.
We would always recommend spacing foot rail brackets no more than 700 mm apart.
1. Start by marking the fixing position of the foot rail bracket, use a few household tools to secure your combination bracket in place with the screws provided (you may wish to use your own screws dependent upon mounting surface).
Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.
2. Simply re-tighten the grub screw to secure tube firmly in position. To finish open tube ends neatly you can add a stylish Tube End Cap.