Flat End Cap for Bar Railing
Flush Fitting Flat End Cap for Tubular Bar Foot Rails and Arm Rails
Flat End Cap - Bar Railing
|Material||Code||Price (inc VAT)||Quantity|
|End Cap 38.1mm Ø||Stainless Steel Effect||38.1||4||Zintec||11.0732.038.20||£5.29|
|End Cap 50.8mm Ø||Stainless Steel Effect||50.8||4||Zintec||11.0732.050.20||£5.51|
Key Features :
|Manufactured from Zintec/Protectan.|
|Option for 38.1mm diameter tube.|
|Option for 50.8mm diameter tube.|
|Requires fixing with a high strength Stainless Steel Adhesive.|
Flat end cap for tubular bar rail, flush fitting end cap designed for insertion into open tube ends to provide a stylish and contemporary finishing touch.
Manufactured from Zintec/Protectan with a brushed stainless steel effect finish.
Suitable for indoor use.
Available for both 38.1mm (1.5 inch) and 50.8mm (2 inch) diameter stainless steel tube.
Cap stand off height (H) of 4mm.
Simple to install with the use of high strength stainless steel adhesive, no need for welding.
What is Zintec
Zintec is created by using the process of electrolysis to coat mild steel with a thin layer of zinc metal. The advantage of Zintec is added corrosive resistance.
1. Ensure the inner end of tube is clean and free from dust and debris.
2. Apply high strength stainless steel adhesive to inner surface of tube.
3. Push fit end cap firmly into tube end, you may wish to use a plastic hammer to do this, (Important : never use a metal hammer as this will mark or damage your end fitting).
4. Wipe away any excess adhesive and allow to set thoroughly before use, (Tip : You can polish away any adhesive residue or scuff marks using WD-40 or Q Clean).
Questions & Answers