3 Way Elbow Tube Connector - 90 Degree - Brass Finish

Flush 90 Degree Corner with One Outlet 90 Degree PVD Coated Brass Design

90 degree flush fitting elbow with 3 way tube connections in a polished brass effect finish, for connection of 38.1mm Ø bar rail tube. Simply glue and slide your tube onto each end for the perfect corner.

3 Way Elbow Tube Connector - Bar Railing

Options	Finish	Ø (mm)	Material	Code	Price (inc VAT)	Quantity
38.1mm Ø Connector	Brass	38.1	Zamak	11.0304.038.22	£20.21	In stock

Tip: To view the product code and full product table on mobile please tilt your device to landscape.

Zamak Construction - PVD Coating Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper. PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.

Key Features :

	Brass effect finish.
	To fit 38.1mm diameter tube.
	Requires fixing with a high strength Stainless Steel Adhesive.

Vertical to horizontal corner connector for 38.1mm (1.5 inch) diameter tube.

Suitable for indoor use only.

Quick and easy installation with the use of a high strength adhesive.

Manufactured from Zamak with a PVD coating to give a hard-wearing brass effect finish (Not solid brass).

---

Installation Advice

1. Ensure the inner ends of tubes are clean and free from dust and debris.

2. Apply high strength stainless steel adhesive to inner surface of tube.

3. Push fit connector firmly into tube end, you may wish to use a plastic hammer to do this, (Tip: Never use a metal hammer as this will mark or damage tube ends). Wipe away any excess adhesive and allow to set.

4. Clean and apply adhesive to additional tubes, push tube onto the connector elbow

5. Wipe away any excess adhesive and allow to set thoroughly before use.

---

You may be interested in...