Bar Railing Bracket - End Pillar - Rail Support
Modern Style End Pillar for Tubular Handrail
Bar Railing Bracket - End Pillar
|Code||Price (inc VAT)||Quantity|
|38.1mm Ø Tube||Zintec||Stainless Steel Effect||38.1||30||60||65||11.0603.038.20||£17.16|
|50.8mm Ø Tube||Zintec||Stainless Steel Effect||50.8||28||70||80||11.0603.050.20||£21.84|
Key Features :
|Manufactured from Zintec/Protectan.|
|Option for 38.1mm diameter tube.|
|Option for 50.8mm diameter tube.|
|Countersunk screws are supplied for installation.|
|For installation you will require a few simple household tools.|
Bar railing bracket for terminating tubular handrail end neatly. Upright end pillar is attached to the upper side of counters and bars to provide strong and secure grab/handrail support.
Manufactured from Zintec/Protectan with a brushed stainless steel effect finish for internal use.
Available for both 38.1mm (1.5 inch) and 50.8mm (2 inch) diameter stainless steel tube.
Two countersunk fixing points for secure attachment.
Screw fixings supplied for direct installation on to hardwood surfaces.
Quick and easy installation with the use of a few household tools
Tubular rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.
Designed for use on horizontal surfaces only. Do Not use as a handrail wall bracket.
We would always recommend spacing bar railing brackets no more than 700 mm apart.
Bar railing brackets should only be matched with similar design style, ie: Ball Pillar to Ball Pillar, this is due to differing heights between styles.
What is Zintec
Zintec is created by using the process of electrolysis to coat mild steel with a thin layer of zinc metal. The advantage of Zintec is added corrosive resistance.
1. Start by marking the fixing position of the end pillar and secure in place using the screws provided (you may wish to use your own screws dependent upon mounting surface).
Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.
2. Once tube is correctly positioned, simply re-tighten the grub screw to secure tube.