Home > Frameless Glass Balustrade > Fascia Mount - Frameless Pro Glass Balustrade

Fascia Mounting Profiles - Frameless Pro Glass Balustrade

Aluminium Fascia Mount Base Profiles for Glass Balustrade

Fascia Mount Frameless Pro Glass Balustrade

PERFECT GLASS ALIGNMENT with Fascia Mount Frameless Pro Glass Balustrade

Fascia mounting allows for the glass channel to be installed flush with the top edge of the structure providing you with a stable and secure barrier. The perfect choice for balconies, decking, landings, walkways and stairways that maximises transparency for a stunning view every time.

Manufactured from aluminium with an anodised stainless steel effect finish, suitable for both indoor and outdoor use.

The Adjustable Safety Wedge Kit allows you to fine-tune the positioning of each glass panel from the inner side of the balustrade - There is no need for a scaffold to adjust the glass from the outer side.

Designed to accept mono and laminated glass thickness of 12mm - 21.52mm.

Full range of pre-fabricated corner components and accessories to create simple and complex layouts.

Quick to install and cost effective with just five anchor points per metre, high performance anchor bolts for mounting onto masonry and concrete available.

Fascia Mount Frameless Pro Glass Balustrade

Advantages of Fascia Mount Frameless Pro Glass Balustrade:

  • Fewer anchors required, and no need for countersunk anchors.
  • Glass panels adjustable in every direction by up to 10mm.
  • Connector pins allow for quick and easy alignment of additional base units.
  • Integrated water drainage.
  • Suitable for mounting onto masonry.
  • Range of channel handrails and cap rails in a variety of materials, shapes and sizes.
Fascia Mount Frameless Pro Glass Balustrade
Usage Light to medium commercial and residential
Suitable For Stairways Yes
Certified Yes
Maximum Load 0.74kN
Weight (kg/m) 7.92
Glass Thickness (mm) 12 to 21.52
Estimated Install Time 1.5 - 2 hours per metre
Cladding Possible Yes
In Our Opinion

Mounting Advice

Any quoted figures about the performance of these products relate to installing into concrete.

Please take advice from an engineer or specialist when installing into any other material, such as timber.

Typical Components for a Fascia Mount Frameless Pro Glass Balustrade Installation

Fascia Mount Frameless Pro Glass Balustrade Components

Installation Advice - Fascia Mount Frameless Pro Glass Balustrade

S3i Video

Video: Fascia Mount Frameless Pro Glass Balustrade Installation - S3i Group



Fascia Mount Frameless Pro Glass Balustrade Installation Advice. An easy to understand guide to fitting a fascia mounting glass balustrade with the Frameless Pro glass channel system.

Need some help?

Download and print our installation advice sheet for Fascia Mount Frameless Pro Glass Balustrade.

Fascia Mount Frameless Pro Glass Balustrade Installation 1-2

Fascia Mount Frameless Pro Glass Balustrade Installation 3-4

Fascia Mount Frameless Pro Glass Balustrade Installation 5-6

Connection Advice - Fascia Mount Frameless Pro Glass Balustrade

Base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.

Fascia Mount Profile Connection
Fascia Mount - Frameless Pro Glass Balustrade Fascia Mounting Base Profile Inner Corner Base Profile Outer Corner Base Profile Cladding - Fascia Mount End Plate End Plate - Stairs Cover Caps Drainage Profile - Fascia Mount