Home > Frameless Glass Balustrade > Top Mount - Frameless Pro Glass Balustrade

Top Mounting Profiles - Frameless Pro Glass Balustrade

Aluminium Top Mount Base Profiles for Glass Balustrade

Top Mount Frameless Pro Glass Balustrade

GLASS ALIGNMENT MADE EASY with Top Mount Frameless Pro Glass Balustrade

Frameless Pro Glass Balustrade is a unique top mounting glass channel balustrade system that allows you to fine-tune the positioning of each glass panel from inside the balustrade.

Produced from aluminium with a stainless steel effect finish, for both indoor and outdoor use.

Designed to accept mono and laminated glass thickness of 12mm - 21.52mm.

Individual top mounting profiles are perfectly aligned together using a clever connector pin system. The adjustable rubber insert and safety wedge glass-mounting solution, makes installation incredibly easy and cost-effective.

Just five anchor points per metre, with fixing options of anchor bolts for mounting onto masonry and concrete or heavy duty screws for timber mounting.

The Adjustable Safety Wedge Kit allows you to fine-tune glass panel position up to 10mm for perfect alignment.

Full range of straight and corner mounting profiles for the most complex of glass balustrade layouts.

Frameless Pro Glass Balustrade is the perfect choice to create a stylish and long-lasting boundary with beautiful uninterrupted views.

Advantages of Top Mount Frameless Pro Glass Balustrade:

  • Fewer anchors required, and no need for countersunk anchors.
  • Glass panels adjustable in every direction by up to 10mm.
  • Connector pins allow for quick and easy alignment of multiple base units.
  • Integrated water drainage.
  • Suitable for mounting onto masonry and timber*.
  • Range of channel handrails and cap rails in a variety of materials, shapes and sizes.
Top Mount Frameless Pro Glass Balustrade
Usage Light to medium commercial and residential
Suitable For Stairways Yes
Certified Yes
Maximum Load 0.74kN
Weight (kg/m) 7.40
Glass Thickness (mm) 12 to 21.52
Estimated Install Time 1.5 - 2 hours per metre
Cladding Possible No
In Our Opinion

Mounting Advice

Any quoted figures about the performance of these products relate to installing into concrete.

Please take advice from an engineer or specialist when installing into any other material, such as timber.

Typical Components for Frameless Pro Glass Balustrade Installation

Top Mount Frameless Pro Glass Balustrade Components

Installation Advice - Top Mount Frameless Pro Glass Balustrade

S3i Video

Video: Top Mount Frameless Pro Glass Balustrade Installation - S3i Group



Top Mount Frameless Pro Glass Balustrade Installation Advice. An easy to understand guide to fitting a top mounting glass balustrade with the Frameless Pro glass channel system.

Need some help?

Download and print our installation advice sheet for Top Mount Frameless Pro Glass Balustrade.

Top Mount Frameless Pro Glass Balustrade Installation 1-2

Top Mount Frameless Pro Glass Balustrade Installation 3-4

Top Mount Frameless Pro Glass Balustrade Installation 5-6

Connection Advice - Top Mount Frameless Pro Glass Balustrade

Base profiles are joined together using three pin connectors, simply insert pins into your first profile and tap into place with a rubber hammer. You can position and push your next base profile onto the pins.

Top Mount Profile Connection
Top Mount - Frameless Pro Glass Balustrade Top Mounting Base Profile Inner Corner Base Profile Outer Corner Base Profile End Plate End Plate - Stairs Drainage Profile