Flush Cross Tube Connector - 4 Way - Brass Finish
4 Way Cross Joint for 38.1mm Diameter Tube with PVD Coated Brass Design
Flush fitting connector with 4 tube connections in a polished brass effect finish, for connection of 38.1mm Ø bar rail tube. Simply glue and slide your tube on to each end for the perfect joint.
Flush Cross Tube Connector - Bar Railing
|Material||Code||Price (inc VAT)||Quantity|
|38.1mm Ø Connector||Brass||38.1||Zamak||11.0309.038.22||£23.48|
Dimensions: For full product dimensions please view this page on a tablet, laptop or desktop computer.
Zamak Construction - PVD Coating
Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.
Key Features :
|Brass effect finish.|
|To fit 38.1mm diameter tube.|
|Requires fixing with a high strength Stainless Steel Adhesive.|
Four way cross joint tube connector for 38.1mm (1.5 inch) diameter tube.
Manufactured from Zamak with a PVD coating to give a hard-wearing polished brass effect finish.
Suitable for indoor use only.
Quick and easy installation with the use of a high strength adhesive.
1. Ensure the inner ends of tubes are clean and free from dust and debris.
2. Apply high strength stainless steel adhesive to inner surface of tubes.
3. Push fit tube ends firmly onto cross connector, you may wish to use a plastic hammer to do this, (Tip: Never use a metal hammer as this will mark or damage tube ends). Wipe away any excess adhesive and allow to set.