Hinge with Cover Caps - Square - Stainless Steel
Square Door Hinge, A4-AISI 316 Stainless Steel
Stainless steel butt hinge with flush fit cover caps for a stylish finish.
Square Profile Hinge with Cover Caps - 4 Point Fixing - 316 Stainless Steel
|Code||Price (inc VAT)||Quantity|
|36mm x 36mm Hinge||1||36||18||36||6||2||9||HINGE-CSH-036||£10.06|
|Manufactured from 316 marine grade stainless steel.|
|Countersunk screws are required for installation.|
|For installation you will require a few simple household tools.|
Manufactured from 316 (marine) grade stainless steel.
36mm x 36mm size hinge, ideal for cabinet doors, hatches and a wide variety of uses.
Suitable for both interior and exterior use, perfect for harsh environments such as yachts and boats.
High quality finish with four countersunk fixing points for DIY installation.
Screws NOT included due to the individuality of each installation (mounting surface, thickness and location), we recommend sourcing screws to suit your particular needs.
We have used the following fixings:
- Length (L): 36mm
- Width (B): 36mm
- Hinge Centre (L1): 18mm
- Hole Ø (D): 6mm
- Thickness (S): 2mm
- Height (S): 9mm
Hinge Installation Advice
You will need a few simple household tools for a quick and easy installation: A Drill, Tape Measure, Pencil, Screwdriver and Screw Fixings.
We have used no.8 size countersunk cross head screws,
Choose your Countersunk Screws to suit the depth of mounting surface.
Remove the cover caps from the hinge.
Using a tape measure and pencil, mark the centre points of the fixing holes of your hinge.
Drill pilot holes to accept your screw fixings and fasten your hinge into place with the fixings of your choice.
Ensure that all countersunk screw fixings are flush with the hinge surface, providing a flat surface for the hinge cover plates.
Simply remove the adhesive cover on the back of the hinge cover plate.
Replace the hinge cover plate and press firmly into position.