Swageless Stud with UNF Thread - Compression Stud

Swageless Stud with UNF Thread in 316 Marine Grade Stainless Steel

Swageless stud with UNF thread - Self assembly wire rope compression fitting.

Important: Whist fittings are exactly the same, the crown ring that sits within the fitting is specific to different types of wire. Please ensure you order the correct fitting.

Made In Britain

Made In Britain

This high quality stainless steel swageless stud with UNF thread has been engineered and manufactured in the UK.

Swageless Stud With UNF Thread

1x19 Wire Type

Options Wire Type Wire
(mm)
TH
(in)
T
(mm)
L
(mm)
Code Price (inc VAT) Quantity 
3mm, 1x19 Strand 1x19 3 1/4 47 67 CTS-030-1/4 £18.86
3-5 days
4mm DS, 1x19 Strand 1x19 4 1/4 47 67 CTS-040-1/4 £21.74
3-5 days
4mm, 1x19 Strand 1x19 4 5/16 54 76 CTS-040-5/16 £21.74
3-5 days
5mm DS, 1x19 Strand 1x19 5 5/16 54 80 CTS-050-5/16 £26.05
3-5 days
5mm, 1x19 Strand 1x19 5 3/8 68 89 CTS-050-3/8 £26.05
3-5 days
6mm DS, 1x19 Strand 1x19 6 3/8 68 95 CTS-060-3/8 £32.75
3-5 days
6mm, 1x19 Strand 1x19 6 7/16 75 99 CTS-060-7/16 £32.75
3-5 days
6mm US, 1x19 Strand 1x19 6 1/2 90 117 CTS-060-1/2 £34.16
3-5 days
7mm, 1x19 Strand 1x19 7 1/2 90 119 CTS-070-1/2 £40.36
3-5 days
8mm DS, 1x19 Strand 1x19 8 1/2 90 125 CTS-080-1/2 £48.00
3-5 days
8mm, 1x19 Strand 1x19 8 5/8 100 135 CTS-080-5/8 £51.01
3-5 days
10mm, 1x19 Strand 1x19 10 5/8 100 140 CTS-100-5/8 £63.22
3-5 days
10mm, US, 1x19 Strand 1x19 10 3/4 120 158 CTS-100-3/4 £66.42
3-5 days
12mm, 1x19 Strand 1x19 12 3/4 120 169 CTS-120-3/4 £99.64
3-5 days
14mm, 1x19 Strand 1x19 14 7/8 140 195 CTS-140-7/8 £187.60
3-5 days
16mm, 1x19 Strand 1x19 16 1 160 227 CTS-160/1 £233.56
3-5 days
19mm, 1x19 Strand 1x19 19 1 1/8 180 245 CTS-190-11/8 £519.04
7-10 days
22mm, 1x19 Strand 1x19 22 1 1/4 200 270 CTS-220-11/4 £720.78
7-10 days
26mm, 1x19 Strand 1x19 26 1 3/8 220 311 CTS-260-13/8 £890.30
7-10 days

7x7, 7x19 Wire Type

Options Wire Type Wire
(mm)
TH
(in)
T
(mm)
L
(mm)
Code Price (inc VAT) Quantity 
3mm, 7 Strand 7x7, 7x19 3 1/4 47 67 CTS-030-1/4-7 £18.86
3-5 days
4mm DS, 7 Strand 7x7, 7x19 4 1/4 47 67 CTS-040-1/4-7 £21.74
3-5 days
4mm, 7 Strand 7x7, 7x19 4 5/16 54 76 CTS-040-5/16-7 £21.74
3-5 days
5mm DS, 7 Strand 7x7, 7x19 5 5/16 54 80 CTS-050-5/16-7 £26.05
3-5 days
5mm, 7 Strand 7x7, 7x19 5 3/8 68 89 CTS-050-3/8-7 £26.05
3-5 days
6mm DS, 7 Strand 7x7, 7x19 6 3/8 68 95 CTS-060-3/8-7 £32.75
3-5 days
6mm, 7 Strand 7x7, 7x19 6 7/16 75 99 CTS-060-7/16-7 £32.75
3-5 days
6mm US, 7 Strand 7x7, 7x19 6 1/2 90 117 CTS-060-1/2-7 £34.16
3-5 days
7mm, 7 Strand 7x7, 7x19 7 1/2 90 119 CTS-070-1/2-7 £40.36
3-5 days
8mm DS, 7 Strand 7x7, 7x19 8 1/2 90 125 CTS-080-1/2-7 £48.00
3-5 days
8mm, 7 Strand 7x7, 7x19 8 5/8 100 135 CTS-080-5/8-7 £51.01
3-5 days
10mm, 7 Strand 7x7, 7x19 10 5/8 100 140 CTS-100-5/8-7 £65.62
3-5 days
10mm, US 7 Strand 7x7, 7x19 10 3/4 120 158 CTS-100-3/4-7 £66.42
3-5 days
12mm, 7 Strand 7x7, 7x19 12 3/4 120 169 CTS-120-3/4-7 £99.67
3-5 days
14mm, 7 Strand 7x7, 7x19 14 7/8 140 195 CTS-140-7/8-7 £187.60
3-5 days
16mm, 7 Strand 7x7, 7x19 16 1 160 227 CTS-160/1-7 £233.56
3-5 days
19mm, 7 Strand 7x7, 7x19 19 1 1/8 180 245 CTS-190-11/8-7 £519.04
7-10 days
22mm, 7 Strand 7x7, 7x19 22 1 1/4 200 270 CTS-220-11/4-7 £720.78
7-10 days
26mm, 7 Strand 7x7, 7x19 26 1 3/8 220 311 CTS-260-13/8-7 £890.30
7-10 days

Dimensions: For full product dimensions please view this page on a tablet, laptop or desktop computer.

Key Features:

316 Stainless Steel
316 grade stainless steel.
UNF Thread
UNF thread.

Information

Stainless steel swageless stud terminals with UNF imperial thread for metric 1x19, 7x7 and 7x19 wire rope.

Norseman type swageless fitting.

Swageless studs are assembled by hand using spanners.

Swageless stud fittings are a good alternative to swaging.

Correctly assembled, swageless stud terminals will be at least as strong as the cable.

When ordering swageless fittings please remember to choose the correct fitting to suit your wire type.

Swageless fittings also available for use with imperial size wire. Please contact us for further details.

Dimension Information:

PDF Data Sheet

Download Data Sheet

Download Swageless Stud UNF Dimension Information


S3i Video

Swageless Termination Video Demonstration


How to...

Cutting the wire

Cut the wire to length. The edge of the wire must be square. Try wrapping a piece of tape around the end of the wire which will keep the strands in place while cutting. A clean cut will assist assembly.

Main body placed over the wire

Place the main body part over the wire rope as shown.

Untwisting the wire

Untwist the outer wire strands by gripping firmly and twisting in the opposite direction to the lay of the wire. Keep unwinding the outer strands until you can clearly see the centre core wire.

Cone

Locate the cone, shown above.

Sliding the core over the centre strand

Slide the thin end of the cone over the centre strand. You can force the cone open with a screwdriver blade if necessary.

Crown ring

Locate the crown ring, shown above.

Position crown ring

Slide the crown ring over the core with the concave side to the cone.

There is a hole in the centre of the threaded stud, fork or eye.

Push the crown ring on with this part and the core will protrude by the correct amount.

Crown ring and core

Note how the crown ring (in red) and the core (in blue) should be seated.

Twisting the strands back into position

Gently twist the outer strands of the wire rope back into position over the Cone. Firmly twist the Crown Ring in the direction of the lay while you position the outer strands in the slots.

Wire sizes less than 5mm diameter arranged on crown ring
Wire sizes greater than 5mm diameter arranged on crown ring

Wire sizes up to 5mm require 2 strands per slot, wire sizes above 5mm have 1 strand per slot.

Strands in final position

When all of the outer strands are in place the Cone and Crown Ring will remain in place with no assistance.

Correct position of strands

Make sure that each outer strand is not out of position and that each slot houses the correct number of strands.

Testing the position of the strands

At this stage you can test that the fitting has been assembled correctly by positioning the threaded end fitting on top of the Crown Ring.

The part should sit flush with none of the wire obstructing the threads of the end fitting.

Twisting body back over core and crown ring

Gently twist the body back up the wire and over the Cone and Crown Ring, rotating in the same direction as the lay of wire.

Screw the threaded end fitting tightly onto the body.

Do not apply thread locking solution at this stage.

Checking strands and core have stayed in place

Remove the end fitting and ensure that the outer strands and the crown ring have stayed in position.

Completed assembly

Screw the threaded end fitting back into position and fix with Loctite 262 or some other suitable thread locking solution.

Loctite

Go to Loctite

Select your product
Quantity
Show prices