Cross Bar Balustrade Infill Fittings

Cross Bar Holder

Cross Bar Holder

Cross bar balustrade infill creates a huge statement and provides a secure solution.

Manufactured from high quality stainless steel and finished perfectly to a satin finish.

Designed to work with 12mm stainless steel bar.


Cross Bar Balustrade Infills

The ideal solution for adding a stainless steel bar infill to your balustrade. A dramatic design which also has safety as a key principal.

Designed to accept 12mm stainless steel bar as an infill and to fit to 42.4mm or 48.3mm diameter tube or flat surfaces quickly and with ease.

Produced from either 304 (interior) grade or 316 (exterior) grade stainless steel and finished to a superb brushed 320 grit satin finish.

12mm Stainless Steel Bar

12mm Stainless Steel Bar available for interior and exterior applications.

Cross Bar Balustrade Infill

Cross Bar Balustrade Infills


Cross Bar Installation Guide

S3i Video

Video: Cross bar installation advice



Tips and advice on how to install cross bar holders onto a stainless steel balustrade system.

Cross Bar Installation Step By Step

Cross Bar Instructions 1

Mark hole position on post. A small piece of masking tape will help with this. Drill 5mm diameter hole.

Cross Bar Instructions 2

Tap the 5mm hole with a M6 tap.

Cross Bar Instructions 3

Fix to the post with M6 countersunk screw.

Cross Bar Instructions 4

Tighten with hex head key.

Cross Bar Instructions 5

Insert rod into cross bar holder.

Cross Bar Instructions 6

Secure with grub screw using hex head key.

Show prices