- Balustrade Systems
- Glass Balustrade
- Frameless Glass Balustrade
- Ready Made Handrails
- Balustrade Wire Kits
- Wire Trellis Kits
- Cable Display Systems
- Interior Fittings
- Door Furniture & Fittings
- Wire Rope Fittings & Hardware
- Lifting Gear & Rigging Equipment
- Wire Rope Assemblies
- Wire Rope Tools & Cutters
- Stainless Steel Shackles
- Tie Bar Systems
Bar Railing Bracket - End Pillar - Long Stem - Rail Support - Brass Finish
Centre Post Support with Long Stem - PVD Coated Brass Finish for Tubular Bar Railing
Bar railing bracket in a polished brass finish with central through hole for centre/mid position to support 38.1mm Ø tube.
Bar Railing Bracket - Centre Pillar - Long Stem
|Code||Price (inc VAT)||Quantity|
|38.1mm Ø Tube||Zamak||Brass||38.1||28||60||130||11.0604.038.22||£21.96|
Zamak Construction - PVD Coating
Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.
Key Features :
|Fits 38.1mm diameter tube.|
|Countersunk screws are supplied for installation.|
|For installation you will require a few simple household tools.|
Bar railing bracket to accept 38.1mm (1.5 inch) diameter tube
Manufactured from Zamak with a PVD coating to give a hard-wearing brass finish (Not solid brass).
Suitable for indoor use only.
Two countersunk fixing points for secure attachment.
Screw fixings supplied for direct installation on to hardwood surfaces.
Quick and easy installation with the use of a few household tools
Tubular rail is held firmly in place using a grub screw mechanism situated on the under side of the mount.
Not suitable for use as a handrail wall bracket.
We would always recommend spacing bar railing brackets no more than 700 mm apart.
1. Start by marking the fixing position of the long stem centre pillar and secure in place using the screws provided (you may wish to use your own screws dependent upon mounting surface).
Use a hex head key to release the grub screw situated on the underside of the mount and side your tube in to position.
2. Simply re-tighten the grub screw to secure tube firmly in position. To finish open tube ends neatly you can opt for a stylish End Cap.