- Balustrade Systems
- Glass Balustrade
- Frameless Glass Balustrade
- Ready Made Handrails
- Balustrade Wire Kits
- Wire Trellis Kits
- Cable Display Systems
- Interior Fittings
- Door Furniture & Fittings
- Wire Rope Fittings & Hardware
- Lifting Gear & Rigging Equipment
- Wire Rope Assemblies
- Wire Rope Tools & Cutters
- Stainless Steel Shackles
- Tie Bar Systems
Tube Connector - 45 Degree - Decorative Ball Elbow - Brass Finish
45° (135°) Decorative Ball Corner Connector for Bar Rail with PVD Coated Brass Finish
Decorative ball connector for 45 degree connection of 38.1mm bar rail tube. Designed for quick and easy installation, just glue and slide your stainless steel tubing on to each end for the perfect corner.
Tube Connector - 45 Degree - Ball Elbow - Bar Railing
|Code||Price (inc VAT)||Quantity|
|38.1mm Ø Connector||Zamak||Brass||38.1||70||40||11.0203.038.22||£25.32|
Zamak Construction - PVD Coating
Zamak is a family of alloys with a base metal of zinc with elements of aluminium, magnesium and copper.
PVD (Physical Vapour Deposition) coatings are usually harder and more corrosion resistant than coatings applied by electroplating and tend to have high temperature and good impact strength, excellent abrasion resistance and durability.
Key Features :
|To fit 38.1mm diameter tube.|
|Requires fixing with a high strength Adhesive.|
45 Degree (135°) corner connector for 38.1mm (1.5 inch) diameter bar foot rail and bar railing tube.
Suitable for indoor use only.
Quick and easy installation.
Manufactured from Zamak with a PVD coating to give a hard-wearing brass finish (Not solid brass).
1. Ensure the inner end of tube is clean and free from dust and debris.
2. Apply high strength stainless steel adhesive to inner surface of tube.
3. Push fit 45 degree connector firmly into tube end, you may wish to use a plastic hammer to do this, (Important : never use a metal hammer as this will mark or damage your end fitting). Wipe away any excess adhesive and allow to set.
4. Clean and apply adhesive to second tube, push tube onto the connector.
5. Wipe away any excess adhesive and allow to set thoroughly before use.